How To Install Rear Quarter Panel Side Glass - Honda Accord EX Coupe 2003-2007 - Auto Glass Install

How To Install Rear Quarter Panel Side Glass on a 2003 Honda Accord EX 3.0L Coupe

Products used:

––––––––––––––––––––––––––––––
When I Was A Boy by Tokyo Music Walker
Creative Commons — Attribution 3.0 Unported — CC BY 3.0

[trry]

Thank you for sharing this DIY video. It helped me see someone doing the project. I have a suggestion . Next time, apply only 1 cote of the adhesive to the car body after you scrape or remove the old one. Make sure you clean the area for proper bonding, and you need a primer for the glass. Use same branding on your case 3M; this will be applied to the glass after remov of old glue. And to the car body if there is any metal exposed after scraping. Let it cure and apply adhesives, attach panel, make it even, press gently around all areas, put a bunch of painters tape to prevent glass from sliding down. If you live in cold weather, leave it dry for up to 3 days . If you live in a hot place, one day, it's all you need. Now finally, some windex and you got a new side panel !

[blubfunkle]

Great video, this was the clearest explanation on what I needed to do I could find
Can’t wait to fix my window lol

[jessenoneofyobussines]

Nice job explaining the product. Made it simple with all the important details

[Miguel_A_S]

Should cut a bigger piece and then cut a V shape on one side. Place the tip flat, V shape will should be opposite direction of the direction your running the glue. You can either do it on the glass or the vehicle just once.

[scromly]

Awesome vid, kinda crazy how hard it is to find something helpful like this lol

[mima-grace]

I had the same problem 😭 I locked my car keys and had to break to window!! This video is everything

[blessedlife]

Should have done a V bead. Round beads unless they are fat beads will not seal correctly

[aceautoglass]

Glad you all got it fixed and going good job

[echy]

How is it holding so far? And do you go on freeways?

[universityrepairFL]

They don’t sell new now. ASM Lexan was the only
us place I could find for
The hatch

[webfilesutube]

thanks for the video, though I don't have the same car and glass, your video is very helpful!

[markjching]

there's a can opener at the end of the tube. do you remove that before inserting into the applicator?

[braydenhancock]

I might be able to replace this pretty easily then

[jdenha]

I was wondering did you have to open the bottom of the urethane tube before you install it on the applicator or it was sealed like a silicone tube?

[themikemurdoch]

Your partner sounds like Aubrey Plaza!

[byronzecena]

Buen trabajo, me ayudó mucho gracias 👏

[CHASIN_A_BASS]

Next time go buy a scraper that uses the box blades..it will make your life way easier when scrapping down urathane..also make sure your glue doesn't need activator. Because if you it does and you don't use it. That glue will not hold long.

[KANSASIOUX]

Leave film of old urethane on car to have to new without scratching car.

[marcoalvarado]

Damn guys you can fix anything haha can you fix my cat? Keep the videos comin!

[marlonorsburn]

Auto glass is not a diy project. Terrible job! Also never use 3M urethane.