Sprinter T1N Van Key Copying

You can copy the key-chip yourself and let any local hardware store cut the key for you.

- AFFILIATE LINKS -

If you fancy, we've launched some new shirts on our RedBubble site:

---
---

[jacklorchdesigns]

FYI get your keys hand cut at Ace, the hand cut machine will trim off the excess. I had two cut and both worked first try without any clean up. No depth issue. Thank you Bill!

[derekude]

That’s a nifty fix you came up with for them messing up the key cut! I’ve done this same process before and when I got mine cut they asked if they should line the tip up or base and went with the base. Thankfully for me that was the right answer. Good watch out for anyone else getting theirs cut.

[garyhodges]

Yet another extremely useful video for the T1N community generally and me specifically! Thanks!!

[craigholliday]

It took me 6 months to figure out how to lock all 5 doors of my T1N. They lock and then unlock and the slider never locks unless you do it manually. The trick is to lock from the front door twice and manually lock the slider, this is the only way to have all 5 doors Next problem was that I didn't have a second key. I got a quote from a locksmith for $900 to make one copy. Now I need you to come over and make me a copy. Thanks for sharing.

[vincentrolfe]

I paid $55 at the dealer for this hose extension and it had MB logos and "made in Germany" written on it in gold. hahahaha

[marioalvarezvilla]

Dam this is so useful, I already bought one and I'm going to do all my vehicles and and put a clone somewhere hidden on the body incase I lose my main key or if I want to leave my main key on the it and take a clone. Thank you ;.;

[scottweikert]

This video is now relevant to my interests! :D

[LukeGreenheart]

I had 2 keys, worked fine. One broke, just had a copy made at a key shop with microchip, tested it, engine started then cut off and said start error... now I can not start the engine at all. Even with the original key. I can not find a solution anywhere. Any ideas? Can I reset the immobiliser? Guessing the key shop programmed it wrong.

[carlynhowells]

Thanks for the video. Much appreciated and needed. Will any of these key programmers of the same brand work for my T1n key? Amazon is out of the one you have linked.

[brettstevens]

Do you have a link for the switchblade type housing for a 2005 sprinter.. my key works fine my housing is broken. And is it possible to switch all my old parts into it? Thanks

[castaneasounds]

Very informative video, thanks! Unfortunately the Zedbull and the keyblanks appear to be out of stock. Are there alternate sources that you might recommend?

[danielewing]

without the chip cloned, does the key still turn in the ignition, just not start the vehicle? Thats what I'm used to from toyotas, but I've had a non-chipped key cut for my (first) sprinter and it opens all the doors fine, but wont even turn in the ignition.

[boppin_bennie]

I've been thinking about getting a Zed Bull for a while, so it doesn't need to interface with a PC or laptop at all when using ? Just sit a working transponder in the hot spot press R (for read), put an unprogrammed key in press W (for write) and it will program the key ? Also you don't need to download software for the Zed Bull prior to using ?

[ancientdiscoverys]

I have a different problem. Changed my ignition lock but now I only have 1 key. So i had a spare made at the hardware store. Problem is the spare key turns fine but wants to jam on something as your taking it out. Original key does not have this problem only the new spare from the hardware store wants to jam up.

[suegorman]

ordered zedbull key programmer - attempting to duplicatequestion on 2003 dodge sprinter ABS codeC1011.appears it can be left front wheel speed sensor or faulty abs module brake pedal gradually sinks to floor appears it is faulty abs module . there are 3 companies that rebuild the abs modules for 370 can you recommend.on the repairs

[ExclusiveKAlberta]

Lately I have had issues starting my 06 sprinter. She will turn over but just won’t start. No codes showing up. Today I just realized if I wiggle the key while trying to start she starts. My key is showing signs of wear. Would a worn out key be a no start issue with her. I do have a new key but no way to program it

[kntran]

Anyone know how to copy a Mercedes Benz Sprinter 2014 key? Id 80e7a28f Type 46 crypt Philips?

[billiehenry]

Somewhat related question. My key broke in the ignition of my 03 T1N. I was able to get the bit out and got a new key but it looks like I damaged the tumbler in the process. So I orded a new tumbler but have no idea how to get the broken one out of the assembly.

Any tips or ideas?

[gloproglowingcups]

Was this just plug and play or did you have to setup and program the machine. I got a valet key from the dealer and I am having the same issues. I have an original key I can copy.

[garyhodges]

Hi! I’m having trouble with the T1N Thing shirt link (me and tech...)!!