EU2000i EU2200i - Propane & Natural Gas Conversion Kit Install for Honda Generator

Step by step installation of the tri-fuel conversion kit for the Honda EU2200i and EU2000i generators by Grenergy.

🚛 FREE SHIPPING ANYWHERE IN THE LOWER 48 STATES!

[eegg]

Anyone else notice the advantages of this conversion kit over ALL the others? First, the adapter is machined aluminum. The others offer either 3D printed plastic or some kind of rubber. Heat, gasoline and age don't bid well on plastic and rubber. They sometimes get brittle, harden or crack.

This kit also includes a "load block" valve in line with the demand regulator, which lets you make adjustments to the gas flow. Natural gas varies in BTU content and propane demand changes with the atmospheric pressure and elevation. And individual generators have different fuel demands. Nice that you can make the adjustment - something other kits don't let you do.

And Grenergy includes vents for the case, to neutralize the vacuum inside the generator housing. Others don't include them and their conversions run rich under heavy throttle because of the increased vacuum. That means more fuel used and lower run-times on a tank of propane.

Oh look, the hoses are made in USA and they're actually rated for gas. And they have hose clamps on them too. A metal push button's included with the EU2000 kit instead of others' plastic ones. And there's a re-gapped spark plug included also. No one else gives you one of those.

Three manuals, one printed in color with step by step instructions and everything you need to know about fine tuning also included. You can't fine-tune the other kit so I suppose the others don't have to mention that.

If I were putting together my own conversion, these are the quality parts I would seek out, and it's all been done for me. But I'm not the guy who shops for the cheapest way to make something work. My generators are 20 years old and they'll probably outlive me. I want conversion components that will also.

[edanderson]

Installed on a virgin 2200i and flawless start and run on second pull. Fantastic instructions!

[tomtee]

This will make 4 fuel conversion kits I've installed after this one. This is a very nice fuel conversion kit and the aluminum carb plate is the best. I have load blocks on everything to fine tune.

[fmlavios]

Excellent video. Just finished converting the first of two of my honda generators.

[ChuckisOutside]

Your videos are very good. I am looking forward to installing my kit on my EU 3000 IS. Thanks

[yxcvmk]

Appreciate all your answers here in the comment section. Let me ask you one more question: Is there a way wo verify that the air/fuel ratio with the propane is set properly? Would hate so see waste on propane/efficiency and or risk damage to the engine with a too lean mixture - if too lean (and heat) even applies to propane...

[yxcvmk]

From your experience, if one has the choice: Would you suggest using/converting a 2000i, or a 2200 overall?

[yxcvmk]

In case one would also fit a remote shutoff circuit to the generator: Would this be OK with propane, will the delivery system (with the lack of vacuum) stop propane flow, or is it a must to turn off the propane source all the time? By the way: the kit seems great!

[yxcvmk]

Is it feasible you sell on Amazon trough their shipping system? This would make it quite simple to order internationally if setup properly, or are the fees just too steep for you (and with that the price the customer would need to pay)?

[yxcvmk]

How cold can it be, so that the propane still works fine? I assume at some point the evaporator would not work properly anymore, correct?

[paulanderson]

Installation video should contain the drilling and installation of the hose and kill switch. Also show how and where the alternate jet is installed. Thanks.

[jacobceparano]

My 2000 kit was missing a pre-gapped spark plug. What gap should I set a new spark plug?

[jacobceparano]

Just received your kit for an older EU2000i and am preparing to install. The generator currently has some issues with the carb and needs the choke partially closed to run. If I only plan on running LPG(Propane) with your kit installed, can I use the current carb as is. Or do I need to repair/replace the carb? Thanks for any help.

[georgegould]

With the kit installed properly can I run my Honda using natural gas or propane ?

[MattCA]

Putting tension on bolts to tighten is definitely a trick that works with new bolts, carriage bolts would be a good option for longevity.

[drobertjacobs]

Are you saying we have to wire and drill for the pressure button to be installed on top for the older eu2000?
If so can you show us how to do that thanks

[EdwardGrayTheEdge]

My EU2200i does not look the same as yours, does that cause a problem? Mine is from Home Depot and does not have the DC output and includes Bluetooth

[chiller]

Gibt es ein Umrüstkit für Honda EU22I?

[drobertjacobs]

I have the old eu2000 version How is my installation different from what I saw here?

[davidowencunningham]

How much to send to Exmouth 6707 Western Australia or do you have a Australian distributor?
How much all up in Australian dollars?