Using a Nano VNA as an RF signal generator

preview_player
Показать описание
A few things to do with the versatile Nano VNA.

PS: If you liked this video please consider supporting Amateur Radio VK3YE by:
* Subscribing on YouTube
(then if you buy something I'll get a small commission at no cost to you)
Рекомендации по теме
Комментарии
Автор

Bravo, je n'avait pas pensé à cette éventualité. Merci de France.

manuelmigues
Автор

About a minute in, I swear he said NanoDNA. Was that intentional?

JohnSmith-bbnp
Автор

Just be careful, the output of the NanoVNA is a square wave, thus has a lot of harmonic energy. Of course, it’s very low power.

alanwolke
Автор

Really useful, just used this to set up a radio. Many thanks 😀

LukeFrench
Автор

i like to use it when traveling with a vx7r to decode ssb. just dial the same frequency in both devices and vx7r on am mode. anything will do as an antenna on the vna. you can also use it for 6m dx cw

drspastic
Автор

I need your wisdom for finding books about radio circuits(actual circuits) as all I can find is either RF engineering books or some basic electronic books, I need books where I can learn the tips and tricks for designing practical circuits on my bench.

bumohamedubualooy
Автор

If it only had a variable output in dB from 1mW down I wouldn't have to spend £80 on an RF signal generator :(

robc
Автор

Hi..
what about the CH1?

73 from 🇧🇷
PX7G6946

attilarivera
Автор

Is there a connection between the VNA and the receiver, or the signal is just transmitted? And another question, can I use it to calibrate an S-meter?

batfalcononyoutube
Автор

Can i use the N VNA to control a vco for spread spectrum freq hopping porposeses ?

SamLAB-yx
Автор

You don't have to set start and stop frequency to the same to get CW, you can just select "CW frequency" below that to get CW mode

tommihommi
Автор

Thanks on the tips, but how to stop the transmission? After enabling CW, it is always transmits, even after turning it off/on. Thanks.

tsynet
Автор

Do you realise that the nano emits a square wave? So you're spattering multiple harmonics, most likely outside the ham bands.

Also, are you aware of the sensitivity of these instruments to feed line capacitance? A great way to blow up a nano is to connect it unprotected to an antenna, where feedline capacitance can easily charge to a level where it blows the instrument.

MrDaim
Автор

so that the nanoVNA has a fixed frequency and does not sweep, in stimulus you mark the same frequency in start and stop

TheMariepi
Автор

I there, i was watching a video where one of these nanos picked up the very small signals even from a car key. I was thinking of getting one but can they record and capture it then see if i could interupt or flood the relevant frequeny and play it back

Ray_Piste
Автор

This thing has so many possibilities. Peter will soon have another book for sale.

davidj.wilcox
Автор

I've always liked how you test devices beyond what their intended use is. That's how we learn and discover - thank for sharing this!

cwguy
Автор

would it be possible to hook this up to a computer and use it as a wspr transmitter?

valetech
Автор

Great ideas. Where do you get them from! Can see this in more test scenarios now.

alanjones
Автор

Thank you for the video. 73 from DL5CH

christophhollmann