Front Brake Master Cylinder Rebuild | Honda Rancher 350 | Partzilla.com

See how to rebuild the front master cylinder on a Honda Rancher 350. First, John shows you how to remove the brake lever and brake fluid reservoir on our Honda Rancher, Then we’ll use a master cylinder kit from Honda to rebuild the master cylinder in our Honda Rancher and then replace the brake handle and reservoir on our machine.

When you finish the job, be sure to bleed the brakes on your Honda Rancher. Here’s how:

VIDEO HIGHLIGHTS:
Removing the brake lever - 1:05
Removing the brake reservoir - 2:13
Rebuilding the master cylinder- 2:40
Reassembling the brake handle - 5:30

Talk to us:

In the video we’re working with a 2003 Honda Rancher TRX350TM, but you will have similar steps for your Honda ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.

RELATED CONTENT:

Honda Rancher front brake shoe change:

Honda Rancher rear brake shoe change:

[AnthonyFierro]

This is one of the best instructional videos ive ever seen. Thank you for no intro, music, fluff or opinions, just valuable information!! Well done

[mikesc]

Thanks for the video. I have replaced my front cylinders, pads, the u-tube that links the cylinders and the breather tubing, also the master cylinder rebuild kit from your videos and partzilla parts for my 2004 Honda forman. Thank you for the help.

[provenpower]

The master cylinder cap screws are not Phillips, They are JIS (Japanese industrial standard). If you use a JIS screwdriver you will almost never round out the screws and not need an impact driver,

[jakegunter]

The fluid in the sight glass moves on mine when I steer the handle bars and the brakes drag alot I dont know what the problem is

[ArturoGarciaMX]

Hi! I have a problem rebuilding the Master Cylinder. Inside the reservoir at the bottom where the fill and return hole are located there is a rubber gasket. I take it apart and please inside a container with brake parts cleaner and left it about 5 hours. when I tried to reinstall, I just can it looks like it's to big to insert again in it's place. Te rubber part looks fine but it appears like it wrought and I can't inserta again. Any idea what happen? Thanks!

[terryroberts]

New system breaks how do you bleed the air from the front brakes

[terryroberts]

Breaks been bleed still no breaks don't work