How to Rebuild Harley Davidson Hydraulic brake System(1972-2023)

In this video, I show the easy way to rebuild your Harley Davidson brake system.

How to Upgrade Cams on Harley Twin-Cam (06-17)

Harley Davidson Twin Cam - How To Disassembly Top End for Rebuild

[Jeefster-isxl]

Aside from the top tips, I just love the fact that you end all your videos drinking a beer. Respect

[michaelwhitehead]

Just tore my caliper apart, then watched your video, and now it is time to do the master cylinder just because. Thanks, outstanding content, and quality production showing details of each fix.

[murphy]

The flick of the beer cap is legit. Great video.

[stevenpaulmargolin]

The best. This is the way to do these kine videos! Awesome. Just grip it, rip it, and done! Mahalo nui, bro.

[irishguyjg_ndchancerecovery]

Watching now brother! Thnx again for the content! SPORTSTER4LIFE 👊

[mantis]

Man u inspire me to work on my bike and drink beer. Legend

[erwinroman]

Got to do this on a friend's '04 RK. Someone used Dot 3 instead of Dot 5 and the master cylinder seals are shot. No pressure until the lever is 1/2" from the bar. Thanks!

[Ash-gbey]

I have to do this exact job once the parts come in.

But don’t have a flexhone that small. Have a 3 blade style for wheel cylinders, otherwise SS, nylon or brass wire brushes.

Thinking possibly the brass one would work?

Great info/video, helped me out again 😎

[mikewelch]

I got a 2013 ultra glide with dual front calipers. Was in process with rebuild kit in hand, when pulling the old piston out found a need to figure out the best way to get the boot out without tearing it up (this one is a little different than yours in the video). I may try to punch it out from the other end? The rubber boot had a short plunger from the handle through the boot. The piston looks similar enough, but it's that rubber boot.

[mikevalentine]

After watchin a few of your DP vids, it's great to see a mechanic zip threw it...make it look simple and get to the cold one after completion. Simplicity is the best teacher.😎✌👊👍

[michaelslawinski]

Doing it already on my bike. What is the lube for the piston sealing or is it the brake fluid?

[michaelmitchell]

U may think that come east to you, but I'd say your a damn harley wizard like Keenan Tatro

[whip-its_dad]

Great video, thank you. My 1981 says I can use DOT 5, can use it on the bike you just repaired the 2007 Ultra ? Thanks again .

[haffbaked]

Hey man good video have a question you might know the answer to. Long story short brakes were dragging, tried to bleed them had no movment in the lines. Fluid was nasty so replaced the line and tried to vacuum bleed down to the caliper, still no movement. Went to the master cylinder took it apart cleaned it good, (did not get the rebuild kit yet) and i still cant get any fluid to come out of the master even if i try to vacuum from where the banjo goes. Kind of lost at this point. Thanks for any info. 2000 soft tail

[m.j.hooligan]

I have a question about your parts cleaner.... I use kerosene in mine. What do you use?

[fycanlycan]

Hi, do I have to drain the fluid when I want to replace the roller on the brake lever?

[johnschlorff]

I've got stuck pistons! How did you get them out? I saw you blow one side out with air, how did you get the other ones out?

[Charlesluckart]

Why not clean the master reservoir more thoroughly?

[Thierry-zqeq]

il faudrait peut-être qu'Harley Davidson apprenne à faire des maître cylindre étanche . ça fuit de partout