WARNING, How to fix aJeep security light on. NO CRANK, NO START P1686 Skim Module WIN Node RKE

Skim module RKE module WIN module diagnostics and replacements

[LayZeeDawg]

To the diy... Get a remanned ecu with the skim delete, remove the skim, install reflashed ecu, start the car, never have a skim problem ever again.

[Flatlandproductionz]

DRB 3 still cost 3000 dollars though🙄🤣😂

[OnlineAutoRepairVideos]

Bro, that was great that you took us through this repair! Once you programmed the one key, do you have to program the others?

[captainobvious]

My ignition switch tumbler failed I put the key in the ignition all it did was freely turn nothing happened. The dealership wanted to charge me $105 per hour labor and $275 for the part for a grand total of $575 needless to say I had it towed to my local mechanic

[luvrone]

My 2010 Jeep Compass doesn’t start, the 2 keys that I have won’t even unlock my car I have to open it manually with the key. I try to start my car with the key and nothing, I do see a red dot on the dashboard. Could it be the same problem as your video?

[raisam]

In case of ECU locked due to missing/defective SKIM, would there be DTC errors? I don't have any DTCs, and I am getting "NO CRANK".

[rockymtnman]

Great video. I have a question. I took my Jeep down to the Dealership Parts Dept. with my new Skim Module and put it on there and then the tech came out with DBR scanner but could not program the keys at all. He thought it was a bad Skim Module but this was a brand new one. So, what is the chance of a "out of box" failure? The lady Service Advisor said it might need new keys? The keys were the original ones that came with the Jeep in 2000 when I bought it Brand New. Any idea why the keys are not programming with the new Skim Module? Your help is appreciated. Thank You

[davybouka]

I enjoyed the video, it's quite educative and big up to you, by the way how do you retrieve the pin?

[danielpeterson]

Man bro I really need u to help me out my car is da same just a 03 limited v8 but it sat for months and I replaced da motor and tried starting it but it cranks no start i have da same light on dash with check light da xar haven't been ran with new motor yet its been over a week since new motor done I have
Key light on dash not flashing just on
I have a check engine light idk why if I haven't even ran da motor
I have no radio and I have aftermarket radio so dealer told me that if I had da factory stereo I can input a code and disarm anti theft but I don't have it
I have crank all day long replaced battery and crank got stronger but still not start and light on dash
I can hear fuel pump prime amd can smell fuel when cranking
Starter is not only new but its spinning da motor
I can't get da dash to produce a code even thou there is a check engine light
But dash shows mileage but gauges don't work I've tried everything unplugged skim battery sat key in ignition on for hours still nothing even did door tricks and still nothing I really need my car running amd I don't have da money rn to pay da dealer to fix I only have one key man PLEASE TELL ME THERE IS A WAY FLOR ME TO GET THIS JEEP RUNNING

[luisduarte]

Hi, you helped me fixed my issue with the gear before. This time my Jeep Cherokee 2014 is having issues to start. Most times the dashboard doesn’t not light up but once it does then it will start up right away. What could it be? It doesn’t matter whether the engine is cold or warm. It does have some transmission codes

[ngonichipembere]

How do you do the all keys losts for the 2003 jeep liberty. I m struggling to get the pin. Forget the dealer here in Africa

[sierradesireexoxo]

My security light is on and my key won’t start my 2006 Jeep Grand Cherokee Laredo

[sportcoat]

I'm having this problem with a magnum now

[derrickclinton]

I appreciate your video man definitely educational where can I get the DBR scanner from?

[pierreremy]

My 04 GC with the 4.0 has just starting doing something weird. It will start and run but i have no gauges and all the lights are on the dash like the key is just in the on position. Also my windows dont work and i can only lock and unlock my driver door. Any advice i dont have money for a new car so i need to fix this. I have a P1687 no bus communication code.

[Reekor]

There's your problem, three transponder keys on one key ring

[JacobBain]

I have a 99 wj and I also have a security light on with no DTCs. The check engine light will turn on after 10 seconds when it's at the run position and still no DTCs. My question, is it possible that the key can go bad considering the age?

[walkerfamilyoverlandingpho]

A 05??? Any competent tech.. with a actual scanner..not a autozone code reader will read ... and you do not need a dealer for anything...unless you got a cheap scanner. And it won't program anything anyway....

[eddy]

Without the new key not programmed the car shut off within a few seconds of starting it. Would there be a chance that it could run for minutes and THEN shut off? My 06 charger shuts off going down the road about 10 after initial crank. No codes. Just wondering if my skim module is faulty??

[tommyf.]

Where do I get a parts pakage? Like you had on the show. The E.C.U. a key already programed?