How to fit a pedestal basin - quick tips from Victoria Plum

#shorts #bathroom #howto #diy #victoriaplum #basin #sink

In this how to guide, we show you just how easy fitting your new pedestal basin can be.

And remember, always consult a professional if you aren’t comfortable with more difficult DIY tasks.

First find your centre using a spirit level. Mark this on both the wall and the floor.

Place the pedestal and basin in position, and check that it’s level.

Now mark the outline of the basin onto the wall.

You can now fit the waste. See our other guide here on how to do this.

And next is fitting the tap. You can check out another handy video here to help with this.

Place the basin back onto the pedestal and mark the position of the bolt holes.

Some pedestals come with the option of fixing to the floor, if so, mark these as well.

Before drilling, check for wires and pipes, then use masking tape to prevent the drill bit from slipping while drilling.

And remember to use the correct safety equipment when using tools.

Then insert the wall plugs and fixing bolts provided with your basin.

With your basin secure, measure and cut the waste pipe to size.

Watch our video here for help on fitting your trap.

For wall mounted waste pipes, this P trap is required. But for floor waste pipes you will need a straight trap that looks like this.

With the trap in place, connect the hot and cold inlets.

Turn on the water supply and place the pedestal in position.

Finish the installation by sealing all joins with silicone.

You can use tape to ensure a neat finish when sealing.

For more home improvement and diy tips, subscribe to our channel

Connect with us: