Programming nRF51822 (Core51822) Using Segger J Link

preview_player
Показать описание
In this video I explained how you can program any nRF51 module or nRF51822 SoC using Segger J Link Programmer. We used the J Flash Lite software to program both Softdevice and Application File.

Timestamps:
00:00 Intro
00:23 Components needed
00:43 nRF51 Programming Pinouts
00:55 J Link Pinouts
01:08 Soldering Wires to Module
01:40 Connecting nRF51 to J Link
02:19 Connecting J Link to PC
02:50 Erasing and Programming using J Flash Lite
03:53 BLE Testing using nRF Connect App
04:28 Important Point!!!
04:59 Thanks for Watching...
  1. itsJamal
  2. RC Toys
  3. Homemade RC Vehicles
  4. Jamal
  5. RC Modified
  6. RC Engineering
Рекомендации по теме
Programming nRF51822 (Core51822) 0:05:10

Programming nRF51822 (Core51822) Using Segger J Link

Programming Hex into 0:04:45

Programming Hex into Custom nRF51822 Chip Using nRF51-DK (PCA10028) | Segger J Flash

Testing the ble_app_hids_keyboard 0:28:13

Testing the ble_app_hids_keyboard example in the nRF5 SDK [SEGGER]

SEGGER J-Link — 0:05:24

SEGGER J-Link — The J-Link Configurator

nRF51822 - Get 0:08:19

nRF51822 - Get started - nordicsemi.com, Stlink v2 and Keil

SEGGER Installation Guide 0:08:43

SEGGER Installation Guide nRF52840

SEGGER Installation Guide 0:08:08

SEGGER Installation Guide nRF52811

Segger JLink Probe 0:03:22

Segger JLink Probe

Heart breaking experience 0:01:40

Heart breaking experience with ST-LINK/V2 with Nordic nrf51822 bolt from the blue, dubious

nRF51822 custom board 0:00:15

nRF51822 custom board

nRF5 SDK based 0:01:53

nRF5 SDK based new project SEGGER Embedded Studio

Blinky blinkt auf 0:00:16

Blinky blinkt auf dem Core51822

Tutorial: Programming Nordic 0:02:06

Tutorial: Programming Nordic nRF Firmware with J-Link

Electronics: What pins 0:01:38

Electronics: What pins on a nRF51822 do I connect to a STM32 programmer?

nRF5 SDK - 0:04:36

nRF5 SDK - Tutorial for Beginners Pt 8 - Debugging over j-link using Segger RTT Library

nRF5 SDK blinky 0:00:19

nRF5 SDK blinky example build write by SEGGER Embedded Studio

SEGGER Flasher — 0:06:07

SEGGER Flasher — J-Flash

Apache MyNewt auf 0:00:57

Apache MyNewt auf nRF51822: UART-Log-Ausgaben der bleprph-App während BLE-Transaktionen

uploading code to 0:00:55

uploading code to nRF51822 custom board using arduino ide

Programming bluetooth low 0:11:05

Programming bluetooth low energy module NRF51822. Linux, openocd y Nordic SDK

Crazyflie with nRF51822/MPU6050 0:00:58

Crazyflie with nRF51822/MPU6050 flying (non-BLE)

SEGGER J-Link — 0:07:48

SEGGER J-Link — The J-Link Commander

Demo: nRFReady Smart 0:00:46

Demo: nRFReady Smart Remote 3

SEGGER Flasher Hub 0:03:16

SEGGER Flasher Hub

Комментарии
Автор

WHICH PROGRAMMER(LIKE JLINK) IS BEST FOR PURCHASE TO PROGRAM IN NRF52840 CHIP?

EmbeddedFirmware-bq
Автор

can I do the same with ftdi ft232rl ? instead of segger ?

channel-uggt
Автор

can u please provide me the hex file or the project file u r using

poornavikasht
Автор

If a vendor debugger works with Eclipse IDE via OpenOCD, can J-Link be made to work via OpenOCD/SWD, specifically data tracing via SWV/SDO?   (My board has SWD+SDO on the connector)

bennguyen
Автор

Lot of effort goes into building authentic hardware and softwares. It is not recommended to use a pirated hardware with vendor authentic software. At least mention it as a clone if you are using a clone. Thanks.

vevasam
welcome to shbcf.ru