How to Put VOID Wireless Headset in Pairing Mode

How to put VOID Wireless headset in Pairing Mode

[MJLStudios]

This helped me when the above video did not work

1. Turn off Headphones.
2. plug in wireless USB DONGLE to PC until light on USB DONGLE blinks slowly.
3. use a NEEDLE/IPHONE SIM Tray Ejector tool and PRESS & HOLD with NEEDLE/TOOL into the hole of USB DONGLE until lights on USB DONGLE blinks RAPIDLY.
4. Hold down "power on" button on headphones until USB DONGLE Rapid flashing STOPS.
5. Congrats if you have followed, it would work.

Has helped everyone who actually tried so far. Try it a few times if it fails.

[urichh]

Wish the dongle didn't require the world's thinnest material for it to enter Pairing Mode.

[turps]

This helped me when the above video did not work

1. Find something you can put into the dongle (the wireless connector) and hold it in, in the little hole until it starts to RAPIDLY BLINK, not the slow searching light and it's the dongle, not the headset.
2. Make sure your headset is turned OFF before doing this next step.
3. While the dongle is blinking in fast repetition, HOLD the power button on the headset and it should pair with each other once again.

Has helped everyone who actually tried so far. Try it a few times if it fails.

[Ccodebits]

Thanks for the vid, my wife's headset became unfunctional after a windows update, doing this saved us money, we were just going to buy another one.

[zachary_smith]

Since EVERYWHERE including this video and the manual all fail to give complete instructions I will. (Make sure software is downloaded first, before you follow these instructions)
1.) Plug the headset and charging cable both into the pc or wall outlet so power is reaching it.
2.) Plug the usb dongle into either the PC/Wall, or into the usb stand, (the usb stand only comes with the SE version of the headset, and is not necessary for use).
3.) FIRST insert a paperclip into the small opening of the USB dongle for 5 seconds untill it flashes. Once flashing begins you can let go of paperclip.
4.) Then you hold the power button on the headset for about roughly 5 seconds untill it begins flashing too, to signal its also in pairing mode.
5.) After the headset starts its flashing about 1 second later, the USB dongle will stop flashing, and that means its connected. Thats it.

Sidenote. If your having issues. Make sure your headset is not dead. You can always try turning the headset off, then back on, then try re- pairing them. Also make sure your sound setting on your pc has headset selected. Otherwise you may not hear sound out of them. Also make sure the proper software is on your pc. Windows 10 should recognize the headset as Corsair Void, if you dont see that, make sure you have corsair software downloaded.

[baoxian]

the steps worked but u do need to plug in the cable(which is the cable u use it to charge) before holding the power button

[bobeagle]

It's just sad to have to make a video like this one, seems like the folks at Corsair should have put this in the manual or on the outside of the box....Thanks Chris

[kozmicninja]

guys i neeed help i dosnt work
my headset doesnt even turn on

[juliend]

please chris help me it stil doesnt work and i cant use my headset it doesnt show me the same as in the steps thad are on the corsair website

[freevbucks]

I've never seen so many issues on pairing a wireless headset, even accounting for my gsp 670's

[PrinceMichixxx]

Thank the lord. I swear they don't have anything in the manual about pairing the two devices and I was sitting for hours trying to figure this thing out.

[YesteertyMusic]

I have got mine in like 7 months and today they don't work anymore... the usb light is white but it ain't working on my PC or on my school Chromebook

[fullmag]

Ok everyone so if you don’t pair still no worries. So grab a buddy and have them hold the pair button on the dongle and hold the power button from the off position. Keep holding it until the nice lady in the headset says you’re paired.

[cactuss_grn]

is this the first gen void elite wireless or second gen?
.

[HexiCore]

I still cant get the thing to charge at all. No lighjts coming on or anything, is it fully bricked?

[jonahs.]

I dont understand. my headset just turns on when i hold the button.

[brendengordon]

Corsair is by far my favorite for many things but this is a huge design flaw

[swwy]

Yo so i did this a couple of times and it is lightning red and green but that's it, it still doesnt connect or is there a next step i am missing

[snedwicka]

I dont know if it´s me doing something wrong. When i use the Void headset it goes to some kind of sleep if no sound is played, and then when i start then they show up on the computer, and i can see it playing in the device. but to get it to work again i need to reconnect the usb adapter/lower and up the volume on the headset and it kicks in, sometimes i have to do both multiple times to get it to work

[theycallmedanger]

Can i connect void elite wireless headset with my phone ?