Installed Vinyl Plank from Costco for Under $1000 and it was EASY

I will show you how to install vinyl plank and share many fast an easy tips that anyone can learn. These tips will give you confidence to take on your vinyl plank project. I share many tips that I use everyday as a professional installer. Get the results you are hoping for and you can install your own vinyl plank and it will look as if it was done by a Pro!

Here are the links to tools I use. If you use these links I do get a commission and my family and I thank you very much for your support!

iRobot Handheld Vacuum H1 - (coming soon)

This is where you will find all the tools I mentioned in the video

While you are there hit the like button!

There is a black glue in this video known as cutback adhesive. It can contain asbestos and you should not grind or sand this glue. I simply left the glue alone and did not disturb it at all. Therefore it remained a safe environment to work in.
WARNING: Do not sand, dry scrape, beadblast or mechanically chip or pulverize existing resilient flooring, backing, lining felt, asphaltic
“cutback” adhesive or other adhesive. These products may contain asbestos fibers and/or crystalline silica. Avoid creating dust. Inhalation
of such dust is a cancer and respiratory tract hazard. Smoking by individuals exposed to asbestos fibers greatly increases the risk of serious
bodily harm. Unless positively certain that the product is a non-asbestos-containing material, you must presume it contains asbestos.
Regulations may require that the material be tested to determine asbestos content. RFCI’s Recommended Work Practices for Removal of
Resilient Floor Coverings are a defined set of instructions addressed to the task of removing all resilient floor covering structures. These
instructions should be consulted with each installation. Hope this helps you understand how to be safe with this glue.

[redtulipsbags]

I've watched no fewer than 20+ videos on vinyl flooring installation today. I learned literally everything I needed to know in this ONE video - thank you for the content!

[Radioman]

Joe is a complete floor mechanic and a very good instructor. I did floors for 35 years
Mostly vinyl sheet flooring. When laminate and lvt came out, I used all the procedures that Mr. Joe did. This man is the real deal. I did the self leveling powder trick too. I hated sticky.

[adrianlili]

I've watched this video over and over again and I finally got the courage and I am going to install a similar floor in my son's room! I keep saying to myself, '' FEAR IS A LIAR'' Amazing quote, Thank you so much for the detailed video.

[mjarndt]

I had to comment again because I was writing my first comment before the very end. Then you added that special touch of wanting to pray for us and our projects. I just want to say thanks.

[jeremyfish]

This guy is a stone cold flooring master! Just did my floors and would not have been able to make some tricky cuts with out his help. Fan for life

[MagicWoodWorks]

Just bought my first home, 1st project is tearing out the carpet and putting in some vinyl flooring. This info is worth more than any of my tools. I want to thank you for sharing this knowledge free of charge. Thank you.

[dragonslayerkonczak]

Excellent videos. In the 80’s we did the exact same thing with the “ cheater tile “ but the vinyl flooring was only 12” squares and a sticky back. I’ve never done vinyl planking and always wondered how you lock in both sides (width and length) of the plank at the same time. You sir taught an old dog a new trick. It’s refreshing to see someone that actually knows what they’re doing. For that I thank you.

[alexgrubb]

Best flooring video I've ever seen. Thankyou for the prayers Joe!

[WeedyCreek]

We're installing this exact same product from Costco throughout my upstairs and came across your video before we started. What a wonderful instruction video - well done! I appreciate your work.

[americanmade]

I just did my whole house with this brand from Costco. My wife's uncle was so impressed with the quality that he did his house with the same Costco flooring

[rubensotoify]

You are a stand up guy. God bless you and your family as well

[patiencevirtue]

We can tell that u have been doing this for years. Ur method for installing floating floors is the BEST I've seen so far.

[jcrz]

love the ‘heat the plank’ tip! saw another video where the guy said need to use a band saw to cut fine pieces. this is a life saver for anyone who doesn’t have those type of tools! God Bless!

[jamescannon]

I’m a visual learner and after watching this video, I’m 100% confident that I can do this. I just ordered a Pull Bar and Tapping Block on line at HD, the next step, is Just Do It. Thanks my DIY friend….. from Napa, California

[ceciliacarter]

I've watched a lot of vinyl plank videos and the is by far the BEST! Thank you and God bless you, too!

[nouns]

Thanks my brother in Christ! May God bless you too and your family!

[ArtBeatKathie]

THANK YOU so much. My laundry room--oy! SO many problems so I had to demo the whole room. I have done several types of flooring but not vinyl planking and this is incredibly fabulous.
Even more than your aid in instructions for the flooring, I am incredibly grateful and touched by your blessing over those that would watch the video. I was feeling in my spirit that you might be a person of faith, and this confirms it.
May your day be a blessed and amazing one. <3

[clementaikens]

Thank you so much, l bought the same planks from Costco and installed in my living room just watching this video... my friends can't believe l did it myself!!

[petanders]

Many thanks for the expert tips and tricks, now I've managed to complete the whole living room, my 2nd attempt, my 1st was full of errors but watching your guides has helped immensely, have a great day sir.

[MrWestsiderider]

Thanks bro ! I am using your tips tomorrow on a project with my 90 year old dad . God bless