Joyor electric scooters | changing p settings

Joyor electric scooter how to change the p settings to change km/h to mph, sleep time, turn cruise control on or off.

P01: rear light brightness: 1 – the darkest, 3 – the lightest;

P02: mileage unit, 0: km; 1: mile;

P04: sleep mode time: 0 – no sleep mode; 1-60 – sleep mode, minutes;

P06: wheel diameter: unit – inch; precision: 0.1;

P07: number of measuring magnets: range 1-100; change from 30 to 25 when removing the speed restriction.

P09: zero start, non-zero start setting: 0 – zero start; 1 – nonzero start;

P12: starting torque: range 0-5, 0 – the weakest, 5 – strongest;

P15: motor drive signal percentage settings: full speed is set to 100

P16: cruise control function: 1 – activated, 0 – deactivated

P17: light settings: the lights are not lit automatically when the vehicle is on, 0 – the lights are lit automatically when the vehicle is on

P99: Reset. Press and hold the MODE button for 5-6 seconds to reset all the parameters back to the initial settings.

[onlynickg]

Hello. I’m thinking of buying a Joyor Y7-S. For the max speed, do I have to do P15 for it because I’ve seen videos of people setting it to 100 and being able to max out their speed without cutting any wires.

[xarrhvh]

for p7 what exactly happens when you change the magnets? Like what does changing it do with your scooter.

[bartas]

hey! got F1 and it shows wrong speed as well as the distance covered. any ideas how to fix that?

[isawgodman]

how do change the max speed from the different gears? 🤔 thanks i have the Y6-ss E-scooter

[damienp]

Ok so how do you change the settings from 500w too a 1000w but my scooter only has p2/p4/p9/p16/p99 p2 is miles p4 is sleep p9 is zero start p16 is cruise and p99 resets the settings any ideas how to make it go up hills better because it is a 30mph scooter and the motor power does 500w 800w and a 1000w

[hyxul]

Hello i have a f3+ and there is no blue cable at all… how can i make it faster/remove speed limiter?

[HorizonMicromobility]

When you derestrict the scooter by removing the blue wire also change the P setting from 30 to 25.

[Patrick-pvud]

is that working for JOYOR Y8-S Electric Scooter

[xarrhvh]

hey I have a joyor f1 and I was wondering if you can share me a tutorial on how to remove the speed restrictions step by step please thanks

[JackodoGD]

Hey! I just bought the Joyor F7 50.2 (I think it's a variation of the LR800). I wanted to know if there's a hack to increase the top speed from 27.8mph to anything higher. I've heard you can remove a wire from the motor controller, but I wanted to know which one and what kind of consequences that change may have on the scooter's motor/battery's health and longevity. If you have any tips, please let me know! I appreciate the video!

[alikarakoc]

Hello, although I increased the p 15 value, the speed of the scooter did not increase.

[Elliot_Mustorp]

If i cut the blu cable, can something bad happen?

[alvingradin]

if I remove the speedlimiter can I make it go slower again in the P settings?

[MrSeal]

How can I make it auto gear 3 when i turn it on

[tarekhamza]

Hi there,
How can I increase the speed?

[Bogdanini]

I've got s5, and this piece of crap apparently have display for 42v and battery 55.6, so it shows charge incorrectly. 🤦🏻 Joyor is the worst thing you can get. Simply trash.