Pro-C Advanced Programming

This video from Hunter goes in-depth to show you how to use the advanced features of the Pro-C irrigation controller, including everything from the programmable sensor override to Cycle and Soak, plus how to create a lighting program and using the Quick Check feature.

[bryanjacobs]

I appreciate seeing you go thru the Cycle and Soak mode. Thanks.

[MJ-eewp]

Hi. I've installed a drought tolerant landscape. There are some station requiring once a month watering and some requiring twice a month watering. The once per week stations were easily programmed. How do I program the pro c controller with a rain sensor to perform the once a month and twice a month watering schedule?

[christopherbrandt]

Man I watched both of your videos and still can’t seem to set my fathers controller correctly. I set the start time then the run time and when it is supposed to switch stations it does not and continues to run one station for the length of the time selected.

[raulcampos]

what to do when u get a error when u are trying to test the station

[sheenaphillips]

How do you reprogram a station? I currently have a station programmed for Station #3, but I would like to reprogram it to be Station #4. Any assistance would be greatly appreciated!

[paulrosa]

I purchased a RS 1000 Rain sensor. I can not get it to work with the PRO C. I have 24 v power and the brown and white hooked up to the sensor screws. Am i doing something wrong?
Thanks

[MJ-eewp]

Thanks for your reply, but you didn't answer my question. I've programmed three stations on a twice per week schedule using the manual provided with the controller as well as the two stations that are on a once per week schedule. However there appears no way to program the controller to irrigate stations once or twice a month, other than manual operation since the controller programming is limiting water days to a 7 day interval. The cut and paste instructions (with line outs?) doesn't work for once or twice a month irrigation needs and would kill the drought tolerant plants in my landscape. This pro c controller appears to be designed for automated weekly irrigation only.

[ramblinman]

I'm not sure I understand the cycle and soak. You broke up watering into 5 min cycles with 10 min soak, but never specified how many cycles needs to be run, which would be 4. Where do you set this.?

[jmwest]

Did I miss the instructions on manual?