Reset Bosch Alarm System to factory settings Ep: 101(part 1 of 5)

I'll show you how to quickly Reset your Bosch Alarm System Solution 880, Solution 2000 or Solution 3000 alarm back to FACTORY SETTINGS. Ep 101
Then I'll take you step-by-step through the process of reprogramming your Bosch Alarm System including how to reset the Master Code, reset the Installer Code and reset the Entry and Exit delays as well as the Zone Types, and Stay Mode
If you don't have the Master code or Installer code for your Bosch alarm this is the video for you. Reset your Bosch alarm and reprogram it to have a basic functioning system in around 15 minutes! Ep: 101
Other Videos in Bosch Reprogram Panel series:

Ep 102 - mobile phone alerts 880

Ep 103 - mobile phone alerts 2000, 3000

Ep 104 - app set up

[HenrysHowTos]

My company wanted close to 1500 to replace and reprogram my home alarm. This was almost 2 years ago! I literally studied the entire bosch solutions 6000 manual and did it all myself. I wish your video was available at the time because you explained it all really well! Good on you!!!

[lukethis]

Hey Steve. Thanks so much for posting this video. It's been very difficult to find comprehensive guides how to actually set this system up in a way that makes sense. It's easy to understand. Thanks so much!

[reganjregan]

Steve you are a genius. This has made things so easy to reset the system, and then reprogram users etc. I had a couple of (quirky) errors on my system, worked around them. Thank you for your dedication and time in sharing this, which has saved me a lot of money. 😄😄

[deanosworld]

You explain it perfectly. Please keep the education videos coming. You have helped me extensively. Thankyou thankyou thankyou

[jesuiskiwi]

Outstanding videos, my old 488 had a fault I could not trace so a did full default reset but then all the programming was lost, this video helped me reprogram it as it is essentially the same and the RFID was on the back of the PIR. Living remotely, the cost of having an alarm tech come out would have been horrendous, so thank you very much :)

[pravinchaurasiya]

Hi Steve, this is great that you made this video. This is very helpful.
I recently relocated my keypad where I have to pass two sensors to disarm my alarm.
How to delay two sensors?
I noticed in your video that you did not select which sensor to delay. How system knows which sensor to delay by going through 466 or 467?

[zaidmus]

Very very helpful. Thanks for posting.

[selmanjaouhara]

My man you make it way too easy. You're a champ!!!

[ParthPatel-zdrt]

Thanks a lot for the video. Helped me a lot to navigate through the system. keep up the great work

[AJ-yrin]

Excellent video Steve. I'd recommend if you change the title of this video and remove "Reset" as the first word then people will be able to find this video easily. Perhaps call it "Bosch Security System 2000/3000 programming and resetting". Just a suggestion as it took some of us quite a bit of time to come across this amazing training video.

[darinclarke]

Hi Steve will this sort out a Bosh TouchOne

[AhmadYusuf]

Thank you very much, extremely helpful

[marekmez]

Hi Steve, We returned from our holiday. My alarm was on. We entered the house and tried to deactivate the alarm with our code as always. Alarm went off anyway. Tried code a few times with no luck. I had to open and then cut the wire inside the siren box. 2 and 3 are still flashing on my control board. How do I fix this? Any idea will help. Thank you. Mez

[erkinborucu]

thank you excellent video. my system is beeping every min. I checked errors 1 and 8 which is AC fail but a power adapter is OK I tested it. how can I get rid of this error?

[lukethis]

Hey Steve, just wondering if you have an LCD Icon Codepad for the 2000/3000 that has firmware version v1.0 (the one that always has the keys with a backlit and longer illumination time after pressing a key)?

[stevenwang]

hi Steve, in your video, when you enter installer mode, sometime zone 15 lit up in keypad, sometime no, what is the reason? I have zone 15 lit up when i enter the installer mode, also, when i try to default reset solution 3000 panel by using same method in your video, the siren start as well, what's the reason?
Thank you very much

[carinabisby]

I have a Bosch system that about 12-15 years old. I need to set another PIN code to turn alarm on and off - zones are fine. Which tutorial do I need to watch? Also, i need new remotes - no one can suggest any - do you have any suggestions?

[chefjhony]

Great vídeo! Thank you so much for your help ! 🔥

[EQtown]

So unplugging power and disconnected battery won't lose the settings?

[michelleclay]

Could you please advise how to increase the volume of the horn? I have successfully reprogrammed the system but now there is no sound?! Thank you!!