8000 RPM Bedini Motor

I built a very simple roller blade wheel bedini motor with 6 very powerful neodymium permanent magnets that are 3/4" diameter x 1" length and have a pull force of about 100 pounds each. I built a massive electromagnet with a 3" diameter by 2" thick with a heavy gauge copper wire and several hundred turns of magnet wire which generates high voltage back EMF that can power different loads as a biproduct. The second smaller coil is a pick up coil for the timing that turns on a transistor to allow current to energize the primary coil. Once the timing is correct, this motor reaches a speed of 8000 RPM with a single electromagnet. The neodymium permanent magnets are permanently glued into the roller blade wheel. I am using a 12 volt DC battery to power the motor. However, at a very high speed and or 24 volts DC input, they can fly out, so be careful if you try to duplicate this motor. Have fun and be safe!

[alexjanito]

Definitely need a wider view of the whole circuit 👌 i love seeing stuff like this

[ChumpChangeXD]

Do you have a step by step build guide?

[royh]

That is just a brilliant idea to use an electric scooter wheel as a rotor! Super balanced and comes with bearings. Easy to drill to place the magnets. I'll borrow that, thanks!

[SINANOZYOLDAS]

For 15 years, I have been working with angular resonance and I am ready to do the electricity generation project together with investors who agree to make an official protocol. Everything will be done openly after the signatures are signed.

[QuinceDeMayo-jgwb]

Buen trabajo! Gracias
Ahora lo puedes hacer sin batería?

[markconley]

Yikes! I hope those magnets don’t fly off. You may want to wrap them just in case.

[dsitechnology]

Hi, do you have the plans and full video? Thanks

[nonsensicalnonsense]

Every coil that's held close enough will generate electricity without creating drag

[jeramydupree]

Wonder if 3 printed wheel with seating for inside magnets and a coil, could be integrated into rollerblades - to charge a battery. Thought ?

[ccobra]

Doesn’t back emf only happen during the first sec or two of a motor startup? That’s the purpose of a potential relay

[yougoof]

Theoretically how many would it take to power say like an outlet (120 volt I think)

[hexaheart]

I still don't understand the battery charging capability of these devices, if they really can restore batteries.

[damocles]

You need a brake pedal, accelerator pedal, and you beat Tesla.

[electroman]

The back emf needs to be to the motor and put a alternator on the other end with 4 motors the circuit only makes it efficient not make power use the speed to turn a alternator and the alternator to a solar charger to the charge battery and use capacitors charged by the sun

[Eric-gikg]

I've always been fascinated with generating power.. simply.
But I have a small problem.. a learning disability that only allows me to learn by physical either doing or watching something done.
Do you have longer versions of this so it makes sense to me?

[gigabit]

Mach mal bitte einen ausführliches Video

[goldliongoldlion]

This engine should not have a personal name as it is a modification of already existing and patented things.

[ahmadbanihasan]

8000 rpm und keine Sicherung für den Rotor!!!!.
Das ist Lebensgefährlich.
Aber es klang nicht so