Build AM FM Radio Receiver DIY kit CF210SP

this video shows you step by step of building your own AM, FM radio kit CF210SP sold on eBay.

**** Purchase this from ***
Banggood:

Jump to different chapters of this video:
00:00 Introduction to this radio
02:30 The kit explained
04:15 Inserting the capacitors on PCB
06:37 Soldering the capacitors
07:33 Inserting resistors
10:38 Inserting electrolytic capacitors
11:47 Soldering electrolytic capacitors
11:57 Audio jack
13:40 Audio amplifier, volume control
14:40 SMD IC
16:00 Speaker wires
17:40 AM Tuning coil
18:00 Tuning capacitor
18:42 AM Tuning coil wires
19:50 Battery connectors
20:55 AM tuning coil soldering and tuning
22:37 Tuning knob
26:46 Putting it all together

Tutorial by Ahmad Shamshiri form Canada
****************************
****************************

Get other projects code and learn Arduino
#robojax #robojaxArduinoCourse

**** AFFILIATE PROGRAM ****

[tiagosoares]

Now I can assemble my own radio with your explanation. Thanks for the video and greetings from Brazil 🇧🇷

[MrNgorman]

Well done sir, I panicked when I found I had only Chinese instructions with this kit, that I wanted to build with my children. You're presentation was clear, concise and made building the radio a pleasure instead of a nightmare, thank you so much, you are a legend :-)

[christianmorl]

Thank you very much for helping me assemble the radio.
It was a lot of fun and you are a good presenter.

[bergarteric]

Mister : with your video you help me very much because i made this kit !!! i'm starting this morning and i have only a shematics in chinese !!! Thanks a lot and god bless you and your family !!!
Sorry for my English .... Eric from France

[redstrat]

Good work sir, that was a great help building my own radio. Thanks

[forwardtema]

Collected such a receiver. The setting is carried out by moving apart the turns of the coil L2 - 8 turns. And it is soldered from the side of copper conductors for convenience. We push the coils more - more range, we narrow - less range. Difficulties arose during the assembly of the case. In the upper left corner, the case strongly clamps the variable capacitor and the wheel starts to spin very hard, and the movement is bitten. It also happens that the frequency of nearby radio stations jumps. In general, a decent receiver for the money, catches all stations, like more advanced receiver models.

[queen_of_domination]

This was very interesting! I used to play with soldering as a teen, but haven’t, in so long, as I was more fixated by computers. That said, both skills are needed nowadays, and watching this video really helped. Thanks and I’ll try this at home.

[AA-zogj]

Aliexpress should pay you for making this video because otherwise, it would be more challenging to assemble this radio.

[randyc]

Great video but you installed the disc capacitors 103 and 202 incorrectly. You put a lead from each in a hole for the other. They should be at right angles to the edge of the circuit board.

[god-of-creation]

tip download the app to check the colour code before installing it i mistaked the 2.2k wit the 22k idk if its gonna work now but ama keep going to gain more experiance with it and thats it might buy another in the future to try again to who ever is reading this have a wonderful day and good luck

[RespawnRestricted]

Thanks for the build I just picked one up and had no directions was a little confused about the knobs to adjust the station

[FootFungusTreatment_Tao]

The potential disappearance of car AM radios may strike a nostalgic chord with some, especially those who enjoy the diverse array of foreign language music stations. In an era dominated by digital streaming services, technological advancements inevitably lead to the phasing out of older technologies. However, this transition also presents an opportunity to explore newer platforms that offer a broader range of content, including foreign language music, thereby enriching cultural exchange and appreciation.

[tommyfournier]

Thanks for info, I was missing some information to complete radio installation.

[BeaSanBuenaventura-kixd]

hi po..pano po kung nawala yung prang white n almbre po yta yun na ilalagay sa J1? help me po nwla po kc

[powderdescent]

Thanks a lot for this video!

Is it possible you inserted the trimmer capacitor backwards? There are wide and narrow alignment spades. Fits correctly when oriented right.

[chongtak]

I have assembled this kit, it was fun, thank you for the help in your video. I am thinking to include an input micro usb in it and maybe a charging module for a battery. Any recommendation? I am lost between all modules on Ebay.

[jjadds]

I order 3 of those am radios an I can put it together can you sale me one already working

[ingeborgsvensson]

Thanks for the video. On mine AM works fine but FM is completely silent, only a very weak hiss but no stations. PCB quality is very bad so maybe a broken track somewhere.

[dwaynewladyka]

How would you receive T.V, when it became digital in North America close to 13 years ago? Also, the radio would be great if there was a carrying strap on it. The brand name seems so similar to Panasonic. Great video.

[izzzzzz]

I had to spread the 8T coil to find my FM stations, also there are two trimmers on the back of the main vari cap. Does anyone know how to trim them and what exactly they do?.