Basement Built CNC Machine with UCCNC - UC300ETH-UB1

Specs:

Rails and Bearings:
X = 1200mm, Y = 1000mm, Z = 300mm
4080 Heavy Extrusions

Available cut area:
34" x 25.4" x 5" (865mm x 645mm x 127mm)

UCCNC Software (Ver. 1.2113) with UC300ETH-UB1 Breakout Board
Gerry's 2022 Screenset
1500w Switching PSU, 60v, Steppers
3 way PSU, 5v, 12v, 24v - BoB & accessories
DM860T Digital stepper drivers
G-Penny 2.2Kw ER20 Water cooled Spindle. 220v, 10A, 4x ceramic Ball bearings
Huanyang HY02D223B VFD

[toddspeck]

Amazing precision in your build. Super impressed!

[celestialdesign]

Beauty! Have a similar one drawn up just haven't found the motivation to materialize that drawing.... until now

[togitegan]

I highly recommend putting a filter over that radiator to prevent problems with cooling performance from dust in the radiator fins.

[graveurgraveur]

Your cnc looks great. Looking foward to see it in action.

[brunofonseca]

I didn't know about that freezemod brand. Super cool, makes the cooling lines much shorter. Definitely on my upgrade list once I finish building my cnc.

[edmundzadurian]

Excellent work followed by a neat machine

[rainbowuunicorn]

Man! Great job ! We need to see that in action, please:D

[joecnc]

Nice work! Looks Great! Gerry's screen sets are great, and he is a super knowledgeable guy, too. Anxious to see how the radiator/heat exchanger stays clean with all the dust. Definitely consider putting a dust shoe/vacuum on it.

[xyzspec]

Sir, that's a really beautiful machine!
I like the design 👌🏻
Subscribed

[sityu]

Awesome work with the router! Maybe try to run in the bearings on the noisy spindle. Just changed the bearings on mine, and it had the same sound for a while. I ran them at 5-10000 rpm for a half an hour. Also it is starting to get cold, so a "warmup run" is always a good idea.

[johnkelly]

Just what I was looking for.. Subbed here.

[somebulgariandouche]

Nice, perhaps the spindle troubles were due to clamping in the wrong spot ? In any case good job.

[kigamo]

Nice build! Are the ball screws and bearings Hiwin?

[WinterEC]

Love this build. It clearly shows you learned a lot from your first self-made CNC. So my question, as a CNC virgin is whether it is worth it to go in with a relatively inexpensive kit (inventables, 6040, xtools, or something of that ilk <<$5k) to get my feet wet and then plan on building out something better once I better know what I need, or just save up and get a much more expensive, beefier kit (like Avid CNC $10-15k)?

[richardcreese]

Very well done. Maybe you might like to have a look at mine.

[KernsJW]

Wouldn't having the coolant on a moving part of the cnc, especially the one that moves the most, introduce in more vibration or perhaps it dampens the existing vibration?

[longboy]

what did you use for the spindle cooling?

[gregfeliciano]

Hi 👋 great looking machine..
I have the same UB1 ..
I need a little help connecting it
Would like a little help if you don't
Mind .can I PM you..if you don't mind