How to| Make RadioLink receiver R8EF bind with transmitters

R8EF is compatible with T8FB/T8S/RC6GS V2/RC4GS V2/RC6GS/RC4GS
RadioLink radio control systems are not open sourced so RadioLink transmitters are ONLY compatible with RadioLink receivers.

[givcloutpls]

What is that black bar connecting the battery to the receiver? I realized it may be used to control the electricity going to the receiver because of how I’m not really able to control motors on this without what ever that is.

[Respet]

Hi I want to ask why is throttle stick is in center

[Respet]

What kind of cable is connected to reciver pin

[ddesign]

Radiolink claims the voltage range on the receiver is 4.8v to 10v. Many planes run a esc/motor combo 11.1v or higher so how can this be achieved without overpowering the receiver? I want to run a 12v esc/motor combo to a boat. The old style receivers had a separate power plug that connected to a 6v battery. Which of these channels powers the receiver? I would like to power the receiver at 6v or 7.2v and the esc/motor at 12v. Is this possible?

[shonen]

So all type radiolink remote can be use with other type of radiolink receiver

[andy_the_lemon_pie]

Is it compatible with the new version RadioLink RC6GS V3?

[greatgandalf]

Can I bind the R8EF to a Spektrum DX8 gen2?

[Isaacfel]

saludos es compatible clon una tarjeta NAZA V2 D DJI?

[gomidasodabasioglu]

Can I connect phantom 2 motors to this ?

[Rad_Schuhart]

Hello! Is it possible to use CH 1 in PWM mode, and all the other chanels in CH2 PPM? Plan is to connect CH1/PWM to an airplane ESC and CH2/PPM to a gyro. Thanks!

[robbiedavis]

What to do when this doesn't work?