How to make a tray with wood and metal!!!

Title: DIY Small Wooden and Metal Tray

Introduction:
In this project, we will make a small wooden and metal tray that can be used for serving or as a decorative piece. This tray combines natural wood with metal accents for a modern look.

Materials Needed:

Wooden board (choose your favorite type of wood, e.g., pine, oak)
Metal sheet (such as aluminum or brass)
Wood screws or nails
Wood glue
Sandpaper (medium and fine grit)
Wood finish or sealant (optional)
Saw (hand saw or power saw)
Drill with drill bits
Measuring tape
Ruler
Pencil
Safety goggles
Clamps (optional)
Steps:

Measure and Cut the Wood:

Decide the dimensions of your tray. A common size is 12” x 8”.
Using your saw, cut the wooden board to your desired dimensions.
Sand the Edges:

Sand the edges and surface of the wooden board using medium grit sandpaper, followed by fine grit, to ensure a smooth finish.
Prepare the Metal:

Cut the metal sheet into pieces that will act as the base or accents of the tray. Make sure the metal fits within the dimensions of the wood.
Attach the Metal:

Position the metal pieces on the wooden board. If using a sheet as a base, center it on the wood.
Secure the metal using wood screws or nails, drilling through the metal into the wood. Ensure the metal is flush with the surface.
Assemble the Tray:

If you want raised edges, cut additional pieces of wood to create sides for the tray. Attach these using wood glue and screws, ensuring they are aligned correctly.
Finish the Tray:

Apply wood finish or sealant to protect the wood and enhance the appearance. Let it dry according to the manufacturer’s instructions.
Final Touches:

Once everything is dried and secured, give the tray a final sanding if needed, and wipe away any dust.
Conclusion:
Your small wooden and metal tray is now complete! Use it for serving, or display it creatively in your home. Enjoy your new DIY project!