How to match orange peel texture- Using a can of Homax orange peel texture on a drywall repair

In this short video clip I'm demonstrating how to spray a can of Homax's oil base orange peel texture on an actual drywall repair where installed a Big Screen Plasma TV.

**Be sure to shake the can well before trying to spray the orange peel texture!
I'm spraying the orange peel texture on some drywall that I installed after installing some wood framing to support the Big Screen Plasma TV
The area that needs the orange peel sprayed has a medium orange peel that I need to match. I'll be spraying this entire area with just one can of the Pro Grade Homax Orange Peel Texture.

All i can say is cover everything that you don't want texture to get on in the surrounding area around the repair that you're going to be spraying the texture on.

**Caution**- Always wear safety glasses and a respirator whenever spraying the can of oil base texture. Try and ventilate room by opening windows and doors.

-~-~~-~~~-~~-~-
Please watch: "How to skim coat a wall in less then 10 minutes | Diy Drywall Tips and Tricks"
-~-~~-~~~-~~-~-

[alwaysrockn]

I do the same as a DYI'er. I tried the water base it takes forever to dry, flattens out too easily when priming, and has more filler than texture. Oil base rocks but use protective gear as mentioned. Gotta prime it no matter what. Good tips and demo dude!

[nancybryson]

That tip about using a taping knife to scrape over the top of where you sprayed in case it is a little too bold for the existing drywall texture is very helpful. Thanks so much for the excellent video.

[edpetros]

Might want to discuss adjusting spray, heavy to light. Also, very important to keep same distance, about 18" to 24" from the wall, and try not to angle the spray. Great tip on knocking down some of the heavy spots after primer.
Thank you

[eddcain]

So HAPPY I found this video!! I took the mirrors down in all the bathrooms and learned to patch and repair. I’m following your steps at this moment. Now waiting for the texture to dry and will prime then scrape. That little scrape gem is worth it all. Thank you!!!!

[TheRebuilt]

thanks for covering blending to existing texture as that is part most people struggle with. Not sure why most other painter videos never cover this. Thanks sire

[jeffmeagher]

I am anything but a professional like you Paul, but have found that it can really help to let the can sit in some warm water for a little bit to thin out the material inside the can before I start to shake the can.

[toyo]

You're the only one on YouTube doing this right, the key is shaking the can continuously and spraying continuously in a circular motion or the can is gonna clog up and stop spraying.

[csc]

Wasn't sure how I was going to fix the hole in my ceiling until I watched your video. Now I feel confident to tackle this project. Thanks Paul!

[donlucas]

that tip at the end was well said, that really makes a difference on getting a better match. thanks

[roselucht]

I bought a can at Ace, I used the water base it turned out PERFECT! Thank you!

[carlbaumeister]

Very useful! I prefer a flat paint over that sort of texture (seems to warm it up a bit), except in bathrooms or other places where walls get wet. I'm glad I watched your video because I was going to buy the water-based, but based on your expertise, I'm going to buy oil instead. Also the advice using 6" knife to smooth it out was fantastic!

[amandakirkhart-betz]

Thank you for sharing how to match the orange peel texture. I've been looking for ways to do some repairs and this is something I think I might be able to use with little to no prior texturing experience.

[annasoucek]

Well immediately I noticed your can working correctly, mine sprayed blobs constantly. I have same can as you, and returned it, bought another, hoping it sprays like yours.

[shaeanderson]

Shout out to you, Paul! I very much appreciate your videos! They've helped me a lot with my fixer upper.

[MrMikestrassner]

Thanks a lot! That’s really a great one. I consider myself a very good drywall finisher and I think this is a killer video.

[JP-tdgt]

Bless you I tried texturing matching wallet last night almost gave up it doesn’t look very good but I found your video this morning and I think I will give it another try I just have to sound a bit more. I tried a couple of those same cans and for some reason they stopped working on me or which is very sloppy even after adjusting the knobs to what I needed.

[Stefano]

Thanks for this video--lots of helpful info here. And I agree with you about the Zinsser 123 primer being a good product. I have used that stuff for many years with excellent results.

[johnharrar]

bonus tip - slow down the camera movements for more detail and less sea sickness for your audience.

[dannyramos]

Hey man these videos make me more confident on doing drywall repairs I appreciate the videos man thanks

[joesands]

It is hard to get a very fine orange peel texture with this product.
It's great for medium to heavy orange peel, but no matter how much I adjust the settings it still puts out larger texture then I want.