How to Diagnose a Common Problem in GM Truck Fuse Boxes

preview_player
Показать описание

Are you having random electrical problems in your GM vehicle that you just can't figure out? Watch this video! Len shows you how uninvited guests can make a mess of your fuse block, and wreak havoc on your electrical system!

Check here for more diagnostics you can do yourself in your driveway!

This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Check out our playlist:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

AAuto
Автор

We need to see how you take off the Whole.fuse box and replace for a new one!

leannfletcher
Автор

I noticed you had to remove that bracket in the corner to access the fuse box housing removal! Forgot to mention that?! It has four 13mm bolts.

richiethesailor
Автор

Gm issues never end. My 05 yukon power locks quit working, only the locking worked. I was not able to unlock from any door.
I pulled and wiggled all the fuses and relays, under hood also and now it all works fine.
Also a bit of good advice to to all the Chevy owners to put a new ground on the engine to body. Mine was completely corroded off on the firewall.

Jeezuzisreal
Автор

And the scary part is some of these new wiring harnesses are made out of organic material meaning the rats in mice love to eat the coating on the wires!

oaktreeable
Автор

And how do you remove the GM fuse box step by step, and thanks one again.

salvadorgutierrezr
Автор

Thank you. Ended up having the same problem. Wires chewed going to the ECM

joeymondillo
Автор

How do you remove the cover and fuse box. You kinda skipped over that part. Thank you for your very informative videos!

davidfry
Автор

05 yukon. I had major issues with parasite draw. Radio clock was at 12 everyday. Dummy me I replace the radio and that was a nightmare because other radios don't work unless you pull a tiny black on the bottom side of it inside.
I replaced the battery and everything works fine now. Even the parasite draw went away. Personally I believe the GM designed all this purposely.

Jeezuzisreal
Автор

I had the trailer brake fuse fail and melt the solder on the bottom of the fuse panel in the underhood box on an 04. It was driving me mad. The solder BB's would roll around in the fuse box and cause weird intermittent electrical issues. I NEVER pay to have my car fixed but that one i took to an electrical specialist and he figured it out. You can take the fuse box shake it and hear the BB's in there. Just a heads up for anyone having these issues. i had doors locking and unlocking going down the road, random no starts, lights coming on and off. it was like an electrical poltergeist.

gearjammergamer
Автор

Is there a good video about the wire that prevents the transmission from shifting into fourth year? And I heard it’s pink can you show us how to get to it?

ericmendez
Автор

I have a 96 Chevy pickup I need to replace fuse box. Due to sitting and corrosion. I will be giving you a call to order

TimTurner
Автор

Do you have a link or anything to how change that harness that goes into the firewall

juanmoreno
Автор

Mine was fuse box under dash was gounding out and caused to melt

crazycanadian
Автор

After seeing this video I'm realizing that maybe that's a major issue with my truck especially because it's really old how much does that cost would that run to fix it is it even worth fixing

lorrainevalencia
Автор

Thanks for the great tip for the fuse box and keep the great videos coming

brianfox
Автор

I just had this exact problem on my Silverado. It completely died on me while driving and would not restart. It would crank but not start. I had to have it towed back to the house. The mice had been making my fuse box a home. I ended up replacing the fuse box, it isn't hard, and it fixed the issue. Now, how do I keep them out of there????

robbw
Автор

I'm having issues with the driver side low beam headlight I've changed light bulb and tested fuses fuses are not blown but not getting power to a few of the fuses that say highbeam I'm stumped I thought might be a fuse box issue but it's only the driver side low beam headlight 2015 gmc terrain 2.4 motor

Gary-cxbi
Автор

Do you have more videos on electrical issues for 2017 gmc canyon cc 4wd or similar

destinyhart
Автор

Great video, my 2013 silverado has white powder corrosion under half the fussed and relays and under the fuse block, thinking of replacing it

matthewsaxe