The BEST $1 Bluetooth RECEIVER board (VHM-314 Module) 2023

I am sharing why I think the VHM-314 Bluetooth Receiver Board Module is one of the best but also cheap. This board will be great for your bluetooth portable DIY speaker projects or just adding bluetooth to an old sound system.

[TaylorSoloaiJR]

I have noticed some of you have gotten one that has a voice, my Bluetooth receiver board uses a AS2 1BPOJ923-55F4 chip.

[jeussmyrrho]

Proud to have this about 3 month ago!
Got it for 54 php and i use it for old model amplifiers which dont have bluetooth so this little thing saves time and efforts.

[euvo_sound]

Just discovered the sounds actually came from windows vista and 7

[Nativei]

I had this board for so long and it had low volume issue. After long time I revisited the board and inspected. As you can on 00:03, C7, R3, C6, C9 is messed up. They soldered caps in position of resister and via versa. I currently doesn't have wondering station and I don't know the correct values to replace.

[salomaomoura]

I buyed the VHM-314 but has become with the lady voice 😕

you can share your link where you buyed ? thanks !

[SalvaBarkuti]

Between 3.7 V and 5 V? LoL! No way. I am pretty sure that what the specifications of the product mean is that it can be powered by either a lithium ion battery (they're usually specified with a 3.7 V nominal voltage) or by an USB power supply (5 V) through its onboard USB micro-B port. The positive and negative terminal holes for the battery can be clearly seen onboard next to the USB micro-B female port. And if the board is properly designed to make use of the full energy from a lithium ion cell, it should still work with voltages below 3 V at the battery terminals.

[ovi_]

Hi, good to know and this is what I am looking for Tnx. for this informative video However, you've forgot to mention the most important detail of the whole entire video. What is the chip number as is written on the chip. This is "critical" for a big majority of people since maybe someone (like me) is actually looking to buy just the chip on its own not the rest and perhaps integrate it on a DIY project. Or...it could be that this particular chip is installed on a variety of other boards that have different topology and/or facilities on it. So, again, knowing the actual chip markings is "CRUCIAL". Tank you

[mumin_]

Can i use it as a Bluetooth module for my headphones or would i need a mini amplifier?

[KiranKJolly]

What about the clarity?
VHM-314 OR XH-A252 produce better quality sound?

[reimon]

Can i use this as a replacement board for a broken Bluetooth speaker? I'm planning on soldering the speakers to the L R and Ground solder joints and the battery on the 'bat' indicated solder joint

[Pixelbattles]

Can we take ouput from both the output points of this module at a same time

[rxbbdoesmusicsometimes]

Will I need to run in through a small amplifier chip or is it loud enough stock?

[-raagult]

In my module i purchased the ic number is ab24bp1x644, is this original? and also I'm getting lady voice.

[christianjebulan]

Can I connect a battery? And if so will it charge it? By the board? If connected to a Micro USB?

[kivitropikal]

When you connected it, it says calls and audio. Which means you can use it for calls. But does it have a mic installed in it? Or is there a spot where you can connect mic?

[Kushal-wkdd]

can i remove the lady voice from my old Bluetooth speaker? if there's a trick to disable it, please let me know

[buraqyener]

Is it possible to programe this boards? I mean rename the board's name on the devices list? Thank you!

[og-]

Do you have a link where to buy? I looked on aliexpress, but when I look into the description of the VHM-314, it still says that the lady will talk for the connection. Thanks!

[voltagetoe]

and what is the frequency response of this chip ? eats away low and high frequencies ?

[leohaukipuro]

does this support AAC bluetooth codec?