Top 3 Mini UPS for WiFi Router | 12V Mini UPS | Router UPS for Work for Home

#MiniUPS #UPSforWiFIRouter #UPSforWorkFromHome

In this video, I will share all the 3 versions of my Mini UPS for WiFi Router. This little gadget is really helpful for this work-from-home time.

Mini UPS V1.0
Mini UPS V2.0
Mini UPS V3.0

Disclaimer:
------------------
I cannot be held responsible for any loss of property, damage, or loss of life if it comes to that. This tutorial was written for those who have knowledge of rechargeable lithium-ion technology. Please do not attempt this if you are a novice. Stay Safe.

**************************************************************************
Parts Used:

Components Required :

[juanpadiazs]

hey it is posible to charge and supply energy at same time?

[jesusignaciobustamanteriva]

What should I change to the V3 to get more backup backup? Also, would like to get my UPS charged with a 12v 3w mini solar panel, is this possible?

[pierrevarloteau]

Bonjour, belle réalisation.pouvez-vous me dire de combien d'Ampère est le fusible.Merci.

[diegobravin]

How could i connect a d1 mini to send a notification if the main power goes out (and therefore the router is running on batteries)? Thanks and great job 👏👏

[whocares]

what is the efficiency level of your ups?

[AnshuSingh-lhwt]

Brother please suggest which ups best for me, my WiFi router need 12v 2a

[DrHerarius]

14:40 I would put a switch between the battery and the main circuit.
Otherwise, it is not logical, since there will be no fully UPC and it is not clear what.

[neeleshmaurya]

Sir can you please make a small inverter for laptop charger which will work for approx 4-5 hrs using solar panel or battery

[whyjaywonders]

Great build. Is it possible to add modification for using a LiFePO4 battery and atleast 3amp - 12v output?

[NoHopeForHumanity-byjk]

Make sure the voltage of the XL6019 is set to be less than the voltage of the input 12v adapter, otherwise the current will not flow across the bypass. Instead it wall always flow through the XL4015 and XL6019 even when AC adapter is providing power.

[bobrhoades]

what do i need to change or add to have a 5v output. my router uses 5vdc. Thanks it is a great job.

[TatapFirdaus]

How long The UPS can suply for Router sir?

[yogeshhingonekar]

You shoud connect relay for long backup

[slakleadify]

could you use a LM2596 in place of XL6019 thank you for you videos

[shanmugamn]

Can use lifep04 battery in this same circuit. Replacing of lithium-ion cell

[paniquea]

puedes facilitar los planos para la impresora 3D ?

[benedictt]

Can I use 2 XL6019 if I want to have two 12v output? Or just split two dc jacks from one XL6019?

[awaazmatroko]

This the best video yet, checked many here of ups for router, marked improvement form the earlier videos : THERE IS A FLAW ?? 1). the battery will not stop charging, when full, there is no relay to stop or start charging ( hence NO PROTECTION) 2). There should be auto changeover to battery incase of power failure. how will you pls incorporate into the circuit, is possible to put all this into one single pcb ...thanks of

[anurasenarathna]

What is the best configuration for 12V battery, 2S, 3S or 4S. even at cut off voltage at 3.0V, 4S gives 12V. Appreciate your view. Thank you.

[sazamaut]

In version 2.0 of router u missed to display tp5100 set for output for 7.4v charging