JETech Screen Protector Installation for Samsung

[nomilomi]

Brilliant! Easy! Done and dusted in less than 5 minutes 👌 now my shattered screen will last me another year at least. The pack comes with 2. The first one lasted me well over a year, helped me not have to buy a new screen after it shattered. Now im using the second protector in the box. Wouldn't buy another brand after buying this cover.

[jupiteh]

The last part when you peel the label 3 ripped all the protection away and didn't let it on the phone like in the video. Made me start all over again with the other label already off which ruined the protection.

[mejhouben]

I'm very happy with the end result. The quality is great, and it was easy to apply. Using the camera protector to center the screen worked perfectly, so I'm not sure why people are complaining about bubbles.

[karrarraza]

Good quality, and the application was seamless with the charger port applicator. Genius!

[razordu]

I just used this on my wife's S10e and the charging port applicator template is genius.

I don't know about everyone else, but this was the best, easiest experience I've had applying a screen protector ever. I'm trying to find one for my phone now, too.

[madjay]

Excellent product... video was just fine shows exactly what your meant to do ... good work JETech

[missparadise]

I'm impressed! The installation worked perfectly (following the steps from the video) and the result is amazing. The whole screen is covered and when you're doing it right you can barely see the screen protector. I hope the protector will do its job and and that the quality lasts.

[bossiestkarma]

Great idea with the charger port applicator tool that made it so much easier than trying to line it up by eye. I'll definately be recommending this to everyone

[mashcroft]

Very easy to apply, a bit on the thin side but I'll see how it goes.

[fahrangunny]

Not as easy as it looks on the video. Messed up both times, trying to get rid of air bubbles

[jessicarodgers]

Wow, just wow. Thank you so so much. I've never used one like this before... I love it! With this video, I had problems get it on perfect. I definitely prefer these over there glass ones!
Thanks a bunch.

[thefirehousesa]

worked perfectly for my s9+. One would need to watch the video a few times to ensure its done properly. Once has to ensure that glass is really clean. The sticky paper should be use to clear the dust of the screen and then use a cloth with isopropyl alcohol to clean the under side of the protector iself. Alot of dust gets collected via static on the surface.

[alnicholson]

It took 2 attempts to do mine, so wasted the first one, The step at about 29 seconds, once you have peeled off the top section and stuck it down, I didnt' see that you then need the white card with the thick end on the phone as as you un-stick the next bit you have to push the white card along the phone which gets out 99% of all the bubbles. Then when you peel the last piece off there are only tiny bubbles on the edges to remove with the card. Its a clever idea and the USB plugin port to keep in stable is really clever.

[simonleonard]

Wow, that was the easiest and stress free application of a screen protector yet! Will definitely buy one of these again if I need to.

[IEnoro]

This is just impressive. I put this on an really cracked screen (a bottle fell directly in the center of my phone screen, and it shattered) and there's no bubbles, even in the ridges created by the glass shattering.

[ryanarmishaw]

Great video and amazing product. At first watch I thought it was overly complicated, but I quickly changed my mind. Each step is clearly documented (and necessary). Follow the steps and it'll work perfectly.

[and]

The installation went fairly well. Still got bubbles around the holes for the cameras at the top of the phone. As for the JETech product, great idea to keep the phone from moving around while you install the screen protector. However, if you get 2 screen protectors in one box (and you will), you'd better be prepared to use both of them at the same time (e.g. you have 2 phones), because you won't be re-using the charging port application tool twice. The glue strip separates from the tool when you try to remove it, rendering it useless unless you (1) leave it in place on your table top until you need it again, or (2) you find another glue strip to reattach it in the future. JETech should've provided 2 tools (or another glue strip) for those of us who only have 1 phone...which is just about everyone!

[ranjit]

When you perform the step at 44th second, please make sure your screen protector is glued at the bottom and not coming off along with the applicator. My first screen protector one came off, did it right on 2nd attempt.

[BrwnGuy]

Amazing screen protector no bubbles at all. Its amazing how far this technology has come. Messed up the first due to poorly follow instructions.

[scottdowney]

Getting the top and bottom "holes" lined up is a bit of a bear as the protector is extremely slippery on the screen.

The "hinge" is not exactly precise either in getting them relined up for final application.

Make sure your tape is matched up evenly, precisely, and securely to avoid mis-application and frustration.

Might even be best to have two sets of hands to work the whole process.