C8 Corvette Oil Change! - HOW TO

preview_player
Показать описание
Step by step walkthrough on how to change your oil on your brand new 2020 + Chevrolet C8 Corvette! Finally a straight to the point "How to" video. Drain your oil, replace your oil filter and fill with 7.5 Quarts of 0W-40 Dexos 2 approved oil. Make sure to check while your engine is running! Do it yourself and save yourself the trip to the dealership.

Looking to purchase our products? Click Below!

C8 Corvette Oil Change Kit - Includes 8Qt 0w40 Mobil 1 & AcDelco Oil Filter!

AcDelco Professional Oil Filter

Paragon Jack Pad - Lift your Corvette safely

***To reset oil life: Go to oil life, click the center button on the right of your steering wheel and follow the prompt to reset.

---------------------------------------------------------------------------------------------------------------------------
Questions? Reach out to us, we are happy to assist you!
(515) 414-8993
Рекомендации по теме
Комментарии
Автор

Thanks for the procedures in a nice concise format

dougyoung
Автор

EXCELLENT! Short and sweet and to the point. NO lengthy BS like all the rest of these zeros who love to hear themselves talk.

JT-wyiq
Автор

I’m not even close to owning a c8, i was just interested in if it was difficult or not lol

Turbyo
Автор

Some of the best DIY content for the C8.

davidhayes
Автор

Like a boss. Just subbed. My dream car!!

KaayJaay
Автор

Its amazing how some people can stretch this content into 20+ minutes....

crazypete
Автор

How much for the oil change and at what frequency? Thanks for sharing!

KaayJaay
Автор

I wish Parton would do one like they did with the Z06. More details are needed.

russellmay
Автор

The oil temperature does not need to reach 175 degrees when CHANGING the oil. It needs to be 175 degrees when CHECKING the oil level. According to the owners manual, "run the engine at idle for about 20 seconds to return all of the oil back into the dry sump oil tank." Then you can drain the oil.

robertparis
Автор

How about the convertible? A few parts extra to remove?

johnultimate
Автор

Good video. A couple suggestions: many oil changers recommend opening the Engine Oil filler cap to aid in draining. Also, the oil drain plug has 2 O-rings, with one that could be stuck up top or fall into your drain pan while draining so ensure you install drain plug post-drain with these 2 O-rings:) Maybe buy a spare set of those 2 rings in case one is damaged during your change preventing loss of vehicle until replaced. Same for oil filter, sometimes the O-ring sticks to top plate and if you don't see this you will have the old one stuck conflicting with the new filter O-ring & you will make a mess and lose your oil & possible engine.

ericalban
Автор

WHat's the best way to do this at home if you don't have a lift?

joecrouch
Автор

If the new oil filter is primed (filled with oil) prior to re-installing...is 7.5 qts of oil still recommended or will that technically be to much?

billybaloneey
Автор

just payed $312 to change the oil and filter at my chevy did i get scammed?

ene
Автор

With engine running? Is that right and if so why did it change?

cjcoleman
Автор

Did not show how to reset oil life monitor.🤨

MovieMuscle
Автор

Best oil change video I have seen ever on any car, well don! QQ...if you prime the new filter before installing, does it end up holding .5 qt? Just wondering how to be as efficient as possible during the change.

yishmeister
Автор

What Type of Oil Filter Wrench was that ?

Brooksn
Автор

Never check your oil with engine running, that’s insane! The oil has to settle to be accurately measured.

cfunjames