EP:1 Arduino Tutorial for beginners | Malayalam

This is the episode 1 of the Arduino Programming tutorial series in Malayalam.
I try to explain the concepts as simple as possible.
Bluetooth Module Link: Aliexpress

Please follow me on:

[shinesanthosh]

സത്യം പറയാമല്ലോ, മലയാളത്തിൽ Arduino tutorial ചെയ്തവരിൽ അതിനെക്കുറിച്ച് വിവരമുള്ളത് ചേട്ടന് മാത്രമാണ്😁😁

[quicklearner]

game .potentiometer 10k 5nos connect chayanulla cord uno bord

[shahirjan]

താങ്കളുടെ mobile നമ്പർ ഒന്ന് share ചെയ്യാമോ? എന്റെ കാറിൽ work ചെയ്തു കൊണ്ടിരുന്ന mobile ഫോൺ ഉപയോഗിച്ചു bluuetooth vazhi കാർ start ചെയ്യുന്ന device ഫിറ്റ്‌ ചെയ്തിരുന്നു. ഇപ്പോൾ ബ്ലൂട്ടൂത് ന്റെ Locking pin number മറന്നു പോയി. ഇനി ആ device bluetouth reset ചെയ്യാൻ കഴിയുമോ?

[voyager]

Appreciated your valuable effort. 😍
Note: Kindly practice your work as professional.🥰👏👏

[akasheledam]

Ith thakarthu. Most awaited video ithinte continuation undakumennu pratheekshikkunnu

[sisoncs]

Informative.helpfull if you start basic arduino programming step by step like led color controllers chasers and also one waterlevel controller with arduino.

[ajith]

Bro bike il Arduino vech engine temperature + battery voltage sense cheyyuna oru video cheyyamo
please

[sebastianbinoj]

Ningal ee coding inghane screenil cheruthu aayi kaanichaal njangal engane kandupadikkum ningalude abinayam kanaan alla njangal ee videos kaanunathu

[vishnuks]

Arduino ൽ പ്രോഗ്രാം upload ചെയ്ത ശേഷം ലാപ്ടോപ് ൽ നിന്ന് ഡാറ്റാ കേബിൾ remove ചെയ്താലും പ്രോഗ്രാം work ചെയ്യുമോ?

Industrial components arduino വെച്ച് control ചെയ്യാൻ കഴിയോ?

[JP-empg]

why compiled program is showing error message while uploading
as

Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno"





















Sketch uses 706 bytes (2%) of program storage space. Maximum is 32256 bytes.

Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

An error occurred while uploading the sketch

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_drain(): read error: The I/O operation has been aborted because of either a thread exit or an application request.




avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x75

avrdude: ser_drain(): read error: The device does not recognize the command.






This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno"





















Sketch uses 706 bytes (2%) of program storage space. Maximum is 32256 bytes.

Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

An error occurred while uploading the sketch

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_drain(): read error: The I/O operation has been aborted because of either a thread exit or an application request.




avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x75

avrdude: ser_send(): write error: sorry no info avail

avrdude: ser_recv(): read error: The device does not recognize the command.




avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x75

avrdude: ser_drain(): read error: The device does not recognize the command.






This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

[njan]

Arduino nanoyil mouse and keyboard library support aavunilya enthu cheyum

[sajinasanthoshkumar]

എല്ലാവർക്കും മനസ്സിലാകുന്ന രീതിയിലുള്ള അവതരണം നന്നായിട്ടുണ്ട് 👍

[amalbabu]

Cheta arduino programming series ayi cheyamo😊😊

[SanthoshKumar-zwzw]

Hi good job. RGB analyzer spectrum Sound level LED program cheyunnathinu venty ippol paranja bord mathiyo ithonnu program cheyunnathine kurichu parayamo can you give Phon number

[pranavaz]

Machane enik oru arduino vedichutharuoo please

[shafeeqca]

Monitor screen zoom ചെയ്‌ത് കാണിക്കുമോ

[shilpasreekumarnair]

Can I get the arduino coding for automatic fan for human detection

[paazz]

Hi good work pls get me purchase link

[rajeevvideography]

Bro electronic padikatha oralanu njan but bro paranjapol simple aayi mansilakunnu good explanation...pine oru requst electronic thalparyam ulla aalanu njan oled vachu aurdunio audio amplifier vendi cheuunna oru video edamo...njan sonthamyi oru amplifier assembly cheyyan ulla orukathil aanu oraal oled vachu cheythirikunna oru disply YouTube kandu apol thudangiya anweshanam aanu. Oru tutorial cheytaal valareupakaram ayirunnu plzzzz...

[vinaykrishnaengineeringtec]

Arduino ithra cheap ayit evdanna kittiyee