TWIN CAM CAMCHEST KIT INSTALL: PT 3

preview_player
Показать описание
Part 3 of our camchest kit install series will be covering mounting our tensioner assembly, securing oil pump o ring, as well as highlighting our #9017 tool to align our oil pump flats for easy mounting into case. If you want to see more tech install and breakdown videos give us some feedback in the comments and don't forget to subscribe and turn on those bell notifications so you don't miss out on any Feuling content.
  1. Feuling Parts
  2. Harley Davidson feuling
  3. parts
  4. Dyno
  5. Ignition
  6. camchest
Рекомендации по теме
How to Upgrade 0:06:38

How to Upgrade Cams on Harley Twin-Cam (06-17)

TWIN CAM CAMCHEST 0:06:47

TWIN CAM CAMCHEST INSTALL SERIES PT. 1

How to Install: 0:35:52

How to Install: S&S Cycle Power Package (Part 2) Cam Chest Kit

Chain Drive vs 0:06:04

Chain Drive vs Gear Drive Cams : Pro Tip

M8 CAMCHEST KIT 1:07:14

M8 CAMCHEST KIT Install Top-To-Bottom @FeulingParts

Feuling Camchest Kits 0:03:36

Feuling Camchest Kits Overview

How To Install 0:39:17

How To Install Harley M8 Camchest - Easy DIY Cam Install

TWIN CAM CAMCHEST 0:06:58

TWIN CAM CAMCHEST INSTALL PT 4

Harley Twin Cam 0:23:34

Harley Twin Cam SE Cam Chest Upgrade Guide | Brock Auto Repair

TWIN CAM CAMCHEST 0:05:28

TWIN CAM CAMCHEST KIT INSTALL: PT 3

Feuling 525 Reaper 0:05:15

Feuling 525 Reaper Conversion Camchest Kit For Twincam 88

How to Install 0:34:31

How to Install the Feuling Hydraulic Cam Tensioner Upgrade on a Harley Davidson Twin Cam.

TWIN CAM CAMCHEST 0:05:42

TWIN CAM CAMCHEST KIT INSTALL: PT 2

TWIN CAM CAMCHEST 0:04:01

TWIN CAM CAMCHEST INSTALL PT 5

Imzz Elite | 1:21:54

Imzz Elite | How-to Install S&S 574 Cam Chest Kit on an 06-17 Harley Dyna

How to Install: 0:33:56

How to Install: S&S Cycle Cam Chest Kit on '17+ M8 HD® models

Cam Replacement on 0:57:11

Cam Replacement on a Harley Davidson Twin Cam, including Pushrod Removal • J&P Cycles

How to Install 1:10:45

How to Install Feuling Parts 472 Reaper Cam Chest Kit on Harley M8 | Step-by-Step Guide

How To Change 0:16:44

How To Change Harley Davidson Cams without special tools (1999-2006)

FEULING CAM BEARING 0:05:05

FEULING CAM BEARING (PART #2078) INSTALL WITH EVAN KLEEN

Fueling 465 Cam 0:06:42

Fueling 465 Cam Chest Kit Install on Streetbob FXBB

S&S Cycle Installation 0:10:17

S&S Cycle Installation - Chain Drive Cams For 2007 + Later H-D® big twin equipped models

DOC HARLEY: 2 0:05:27

DOC HARLEY: 2 POINT RULE IN CAM INSTALLATION

How to Install: 0:22:44

How to Install: S&S Cycle Winter Power Pack (Part 1) Big Bore Kit

Комментарии
Автор

Was that red or blue Loctite on the cam chain tensioner threads?

keonef
Автор

I understand the theory behind the thought of Pulling Away from the case...however being old school disagree with that method. I DOOOO however agree with the method of installing the o-ring to the back of the pump prior to installing to case. seen one that the pump cut the o-ring during installation...

Chancho
Автор

So this plate does not require a hydraulic press?

HoustonRryda
Автор

Awesome video! I always run fueling plates and pumps in my bikes, top notch products on everything u guys put out. One question for you, when would u recommend running roller rockers in a twin cam? Or what lift, I’m running a 590 lift cam and iv heard a few say after 585 but most say really not necessary on anything under a 600lift. I just like doing Things right or making things the best it can be

josephtussey
Автор

what type/brand of assembly lube are you using? and is that Red loctite?

Chancho