How to Install: S&S Cycle Winter Power Pack (Part 1) Big Bore Kit

Показать описание

In this video, we take you through the first part of our series on how to install the S&S Cycle Winter Power Package. For part 1, we cover the big bore cylinder kit.

For more product info visit:

Рекомендации по теме

Комментарии

thank you very much for the information

-abbat

I've learned 2 trust s&s products...

morrisdennis

If you do that to a 50 000 miles or more engine is it not best to replace the craink case bearings while you are almost there?

RickStuff

Hola, las culatas originales del 103 no es necesario cambiarlas para instalar el kit 110?

holaadrian

I'm currently putting your 110 BigBore kit on my 2010 Harley-Davidson FLHTK. Do you have a video for doing the heat cycles? At 2:42 in video what would Clearence be for my Harley-Davidson?

Richard

Hello, I'm a little bit confused. I've purchased the 106 kit. On the instructions it's written to put the black ring with the dot facing up as 2nd ring and the top ring has chrome edges and letter facing up. In your video it seems that you switched top and 2nd ring am i missing something?.. Don't want to mess things up

trvegiibz

I just ordered the power pack, can I use my stock heads and valve springs ?
The stock heads are From a 103

MeatyGoulash

How much more power will this power package all done ad to an already 96 c.i. Twin cam engine? It is a very light softail that is used for stoplight to stoplight action. I assume that you will help pick out a couple camshafts for my intended riding purpose...

stevenminix

What is the clearance on the case supposed to be for 07-17 96" motor?

vasiliosholevas

I have a dyna fat bob with an 96. The bike is from 2009. I almost install
S&S 106" big bore kit
•Vance & Hines black short shots with quiet baffles and ECU reprogramming
•Clarity Air Cleaner Black Ops Roland Sands Design

Any idea of an average Powergain with these mods?

Thank you in advance

nunogomespl

Good video, right up until you torqued the bolts with more than one click and then loosened the bolts with the torque wrench…rookie mistake. Should know better. When tightening every extra click gets more movement, and you should NEVER use a torque wrench to loosen. 🤦‍♂️

MW-nwut

How to Install: S&S Cycle Winter Power Pack (Part 1) Big Bore Kit

S&S Cycle Installation - The S&S HI-4N Ignition

S&S Cycle - Installing S&S Super E & G Carbs On H-D® Evolution® Engines

How to Install: S&S Cycle Cam Chest Kit on '17+ M8 HD® models

Weekend Wrenching: How to Install an S&S Cycle Power Package

How to Install: S&S Cycle 1200 Conversion Kit for XL models

How to Install: S&S Cycle Winter Power Pack (Part 1) Big Bore Kit

S&S Cycle Tech Tips - Installing S&S Power Tune Dual Headers

S&S Cycle Stealth Intake / Mini Teardrop Installation : Milwaukee Eight Softail

Fix COD Black Ops 6 Not Installing/Installation Stopped Error On Xbox Series X/S/Xbox One

How to Install: S&S Cycle Power Package (Part 2) Cam Chest Kit

Install S&S Cycle Teardrop Air Cleaner • Available from J&P Cycles

S&S Cycle Installation: Super E Carburator

S&S Cycle - How to Install / Remove the dB Reducer In Our 4.5' Mufflers

S&S Cycle Installation - Stealth Air Cleaner

S&S Cycle - Easy Start Cams

S&S Cycle - Installing The S&S TC3 Oil Pump and Cam Plate

S&S Cycle - Product Overview - Quickee Pushrods

S&S Cycle Installation - Chain Drive Cams For 2007 + Later H-D® big twin equipped models

S&S Cycle - Product Overview - Tappets

S&S Cycle Mini Teardrop Stealth Air Cleaner Install : Milwaukee 8 Touring Models

How to Install: S&S Cycle ECM for Indian® FTR1200

S&S Cycle Installation - Touring Mufflers

How to Install: S&S Cycle Power Package (Part 3) Dyno Runs

S&S Cycle - Product Overview & How to Install - Tuned Induction Kit