How to Print with Bambu Labs PAHT-CF Filament on a Bambu Labs X1 Carbon 3D Printer

Join me as I explore the world of PAHT-CF 3D printing with the Bambu Labs X1 Carbon 3D Printer. Get to know the optimal settings, filament drying, and post-processing methods for PAHT-CF prints.

Support the channel and buy a shirt:

DJI FPV Drone

As an Amazon Associate, I earn from qualifying purchases.

[timboles]

thank you for this cause im gearing up to print paht-cf

[Todestelzer]

If you want really stiff and thought PA try out LUVOCOM 3F PAHT CF 9891 BK.
It’s really expensive but the stiffest PA I could find so far. I can’t compare it directly to the Bambolab PAHT because I didn’t tried this PA yet but it’s worth trying out.

[xcm]

Good stuff if you want to build an engine block

[barjimarine]

Small parts are easy, have you tried large parts with high percentage of infill that cover most of the print bed? I can't get a satisfactory result without major warping! Any advice??

[oleksandrkosylov]

Thanks a lot for the video! Can you please tell is it safe or allowed to print with PA using AMS? According to official Bambu pages, none of PA are allowed to be distributed using AMS so I'm confused :)

[ChristianJHosbach]

What did you use for bed adhesion? I keep getting warp.

[enjoytheride_cz]

Hello, it's possible to make some intake manifold runners etc. and use them like final product?

[syncprism]

Nice video! I wonder if the Dry vs. Wet strength comparison is strictly about "filament humidity before print"? If I print with dried filament, but after it turns into the printed part, I imagine the part would still absorb water along the way, right? Then will that compromise its strength still?

[tinkerman]

I found some reflection showed on surface of print bed in video, didn’t u applied any glue or anything else?

[ColoradoAdventureClub]

I have some CoPa and som CFPc if you wana try those too! I havent tried the CoPa yet but the CFPc looked real goood. I also have some of the origanl CFPc that came with the machine.

[enjoytheride_cz]

Is it necessary to use glue for this material with bambu p1s?

[diode]

Have you had trouble with shrinkage on the z axis only? I have been having trouble hitting z dimmensions.

[TheHelicapt]

Do you use the .40 nozzle when printing your CF filaments or a larger one ?

[mattdagger]

I just ordered some of this filament for diesel heater adapters, do I really need to buy a 0.6 nozzle? Or can I just use th 0.4 that I got with my x1c? How necessary is the 0.6??

[mercartax]

There was no High Temperature Plate in our X1 - Carbon package. Also, that plate cannot be delivered currently by Bambu Lab.
Their website lists the Engineering Plate as an alternative for 100°C printing. Is that a good choice, too? That one we have.

[charlieromeo]

What support material should be used with PAHT-CF?

[Festivejelly]

PA6-CF is superior. You cant use it in the AMS but tbh you want to be running from a filament dryer anyway. PA12 is okay but its nowhere near as strong as PA6