Fixing Turn Signal Hyper-flash [Jeep JK]

Today, I show you how I fixed my hyperflash issue on my 2011 JK.

HOW TO DIAGNOSE HYPERFLASH:
1. Check if you have any disfunctional lights
2. Check fuses
3. Check wiring to turn signals & tail lights
4. Check load resistors

if you followed all those steps and couldn't fix it, trade in your JK for a YJ. ;)

Buy a Shirt!!

Follow me on social media!
Instagram:
Instagram (Jeep page):
Twitter:

Buy some merch!

Be a Patron of my channel!

For Business Inquires Contact:

Software/Equipment I use:
Edited On: Adobe Premiere Pro CC
Cameras: iPhone 6S, Sony a5000 (16mm-50mm), SJCAM M10 Wifi, Canon Rebel T6i (18-35mm)

[brucejones]

Finally someone that takes the time to solder and heat shrink automotive wiring. I hope you waited for the wires to get hot enough to melt the solder instead of relying on just the iron to melt the solder. It would have been nice if you show and explain that on one of the soldering connections. Very good job young man. You are renewing my faith in your generation.

[lbantay]

Thanks a ton. I thought my problem was my front turn led signal, and I didn't even think about my led taillight being the problem. Your video was super helpful, and I was able to solve my hyper flash issue. You rock!

[Pontiacdreams]

Thank you! Very clear video and fantastic explanation/advice. Best wishes!

[cearnest]

“When you touch a negative to a positive well it get really damn hot” the best line in the video

[LAZY-EDIT]

Thank you bro, watched video before messing with the front signals

[jamesstumpf]

Thanks man I just installed both front side and rear LED lights. The rear worked fine until I plugged in the front and then I immediately got that rapid flashing turn signals. I’m definitely going to check the rear tire lights first. Thanks for the tip!!

[fundriveniceville]

Just installed a complete suite of JW speaker products and have a right hyper flash turn signal issue. Guessing my rear resister is not well connected. I bought my system slightly used and during reinstall or removal that may have occurred. Looks like it is time to remove the rear tail light and check continuity. As always I am benefiting from those of you like Chris that have trouble shot this issue.

[FITH]

Thanks for the video bro! I was having the same issue with my 2011 JK

[duneattack]

Keep up the good work. I've done a couple of your mods... this one, and the traction control switch mod. You're the best man. Keep doing vid's!

[randomnav]

Great video. It saved me a ton of time. BTW, solder is pronounced sawder.

[fastcrxzc]

I just added LED front signal lights on my JK....I also have LED taillights and have load resistors on the tail lights but I still have HF on the front signals. Wonder why the LRs in the back dont fix the front HF?
Note: LED bulb replacements verses whole LED assembly's like you have.
Any suggestions anyone? I'm going to try and install LRs in the front tomorrow but not sure which wires to go for (theres 3 wires into the socket connections)

[KenPoisson_world_traveler]

So, you're saying that the front LEDs for turn signals don't need a load resistor if you have a load resistor on your rear LEDs?

I do have LEDs in the rear and they came with their own built-in load resistor. never had a problem with them.

but I'm having an issue with the front regular lights and thought I would change them to LEDs. Someone told me I need to add additional load resistors but according to your video I probably don't.

What do you think?

[nccoach]

This solved the fronts as well? I've had issues with the fronts for 6 months, then installed my JL Gladiator LED Lights and now all 4 go crazy!

[claymartin]

Did the correction of the back load resistor fix the hyper-flash on the front blinker without putting a load resistor on the blinker?

[SoldiersAttic]

Hello
I just installed my RGB HALO tail lights, identical to the Sumpie brand on Amazon. When I tested the driver side it functioned correctly; but when I did the same for the right, the tail light displayed as if I had the hazard lights operating. I'm pretty frustrated, because I installed it, my first mod, and now I have to put the stock back on. could it be the load resistors doing this? I also installed the vostech 8 switch box console, I haven't installed the fron't lights, so You adivce is greatly appreciated.

[SSniper]

Lmfao that comment about the inhilation of soldering wire smoke was hilarious

[Volunteerfan]

I have the flat led tail lights since I bought it. Just now tried to install resistors with no luck. It starts right for a few seconds then starts the hyperflash. Any idea on what I'm doing wrong?

[MrDstegner]

I have the same signal lights and tail lights. Worked fine for 3 years. Now after I hit the signal on driver side I get Hyper flash and message on speedo info area "left side light out " but. They're flashing?

[Darth-Rothgar]

Question for you the bracket you have for the load resistor where did you get it and how do you have them mounted in the rear?

[wehwolf]

Thanks man! I had the same problem on my JK