Hemingway Knurling Tool: Part 2

This is part 2 of building the Hemingway kits Sensitive Knurling Tool, I am thinning the spacer and have discovered that the given dimension for the thickness is way to big for the thickness of the arms so I have spent quite a bit of time off camera fitting it to what I consider a more appropriate thickness. I am also cutting the releifs in both sides for clearance of the adjustment thickness. Please leave me any comments or suggestions. I hope you find something interesting here.

You may consider supporting us on Patreon.

Below are links to a few of the items I use in the shop, any links which are not directly to our website such as Amazon links provide us with a small commision which helps support the channel:

Timken Bearing Atlas # M6-82B Rear Spindle Bearing Timken # 07087

Below are products which we build and offer thru our website.

Please bear in mind that these are my opinions and the techniques I have chosen to use in my shop for my projects. You are responsible for your own choices and I take no responsibility for how you might use any information presented here.

[pweimer]

Dan, wasn’t sure what those milled areas were for. It made since with the mock assembly at the end. Thanks again for sharing.