2003 GMC Yukon C0265 EBCM AKA ABS control Module replacement

This is for all GMC SUV and Trucks with code C0265. If you have both the parking light and the ABS light on, this video will help you solve that issue. This is a common issue with these modules. Over time, the module gets damage by the vibration of the vehicle, so it'll cause the light to illuminate and when it does, its time to replace it with a new one.

Make sure to buy the right parts for your vehicle. There are 3 different types of abs control module. There are
11-2-2 pins
16-2-2 pins
and a
40 pins
ABS control module. The one I'm replacing in this video is a 16-2-2 pins.

Tools:

Parts:
ABS control Module aka EBCM (electric brake control module)

Torque specs:
Hand tighten with tool

like and share this video!

If you have any questions or concerns, feel free to leave comments on our FB page.

Like us on Facebook

and SUBSCRIBE!

[JackBNimble_JackBQuick]

I have watched several videos on this exact module. This video is by for the best so far!

[tacosdelenguacontodo]

Thanks for explaining the difference between ebcu only video I found explaining the difference

[scottb_]

This is why I need to buy vehicles outside the rush belt, man that underbody is clean! Nice vid

[BGLM]

Look at those clean, rust-free brake lines. Must be nice!

[riddecade]

Thank you no bs straight to the point and very easy to understand. Thanks a million I believe this may be a huge braking problem I am dealing with. Everything has been replaced except for 2 sensors and this module!!!

[jamesayers]

Thanks for sharing this with us, mine has gotten so bad that it locked down all my brakes on truck thank you vary much your a god sent

[vzMedia]

Thank you so much for this detailed video. Now it’s time to order and get to work.

[lawrenceyacobelli]

THANK YOU... DID IT AND IT WORKED GREAT!... [Piece of advice... Sucking off the old solder is very helpful for the new solder to flow]

[Bill-jg]

Hi. Could a abs modual leak. Or is it the part that that its screwed too. Also what is the name of the part the moduals screws too

[darnelltabor]

No truck in Michigan (where i am) looks ANYTHING like that underneath 😂😂😂😂
Great video. Thank you!

[d.a.]

Drove 5-10 minutes but mileage never moved 😂😂😂😂😂 got to love GM digital speedometers

[richstevensproductdevelopm]

terrific video! Want to weigh in on my problem? My 03 Cadillac escalade ESV, JL4 brake option, self applies all brakes gradually, eventually - sometimes - coding C0131 (Traction Control System Pressure Circuit) and then, sometimes, in addition, "Service Stability Control" on the DIC, coding C0161 (brake switch malfunction / but could mean pedal travel / pressure mismatch) Could it be communication problems? To get the truck to move, I turn off the engine, pump the brakes vigorously, then the brake pressure releases and I can move. Replaced malfunctioning brake MC - that triggered a broken (rusty) brake line, and then hydrobooster. Replaced all lines with SS, and while I was in there, all the calipers / hoses/ pads/ discs because...I was in there anyway. Pressure bled & ABS bled with tool. 4 months later the brake self application started. Stopped for 4 more months...now it's back. I use a Foxwell NT630Plus tool for ABS bleeding.

[darrenburnside]

How did you drive for 5 or 10 minutes and the mileage not change?

[bmwman]

Excellent video but still trying to figure out how to extract the torx bolts on the left side of the truck. They’re the ones you can’t see and they’re either rounded off or have crud in them. Can’t tell which one. For how long I’ve been scraping I think the latter. Not that this video is useless information but be aware that the bolts on it may be stripped out.

[rongreco]

You make it look easy, I sure don't have enough room to get to the 4 T-20 bolts. Might be easier to change the whole unit

[hansenjames]

What does it mean when you put a envoy on the machine and it say manufacturer control module?

[AntonioPerez-obfy]

So did you really drive 5 minutes and didn't even add 1 mile to the odometer?🤨🤔

[natechops]

I can't for the life of me find the 16 2-2 pin with T/C G8 Serial GM Part # 88983891. Any suggestions?

[garymurphy]

Did you buy a used one or new one
We purchased a used one still have same issues GMC could reprogram They no longer supply this part Any suggestions
Thanks
Gary

[sergiovillalobos]

Hello, good afternoon! Could someone help me indicate where the EBCM is located in a 2008 GMC Acadia?