29 TOOL’S HACKS FEW MEN KNOW ABOUT

Timestamps:
0:08 Wall repair
0:49 Hole in a hammer
1:17 Toothpaste hack
2:10 Tile craft
2:42 Drill hack
5:35 Rusty bolt
This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability. Any action you take upon the information on this video is strictly at your own risk, and we will not be liable for any damages or losses. It is the viewer's responsibility to use judgment, care and precautions if one plans to replicate.

The following video might feature activity performed by our actors within controlled environment- please use judgment, care, and precaution if you plan to replicate.

----------------------------------------------------------------------------------------

Our Social Media:

----------------------------------------------------------------------------------------

[johnnycastellanetta]

"Tips for people who've never done any real work in their lives but want to appear handy". Title corrected. Peace

[slimjim]

Isn’t it amazing how many simple little hacks you can do with the right set of expensive tools! :).

[bryantimmons]

I saw the 1st "hack" and was amazed on how terrible the drywall repair looked, the hole literally looked better. I'm watching the rest of the video for comedic effect.

[mikebloggs]

If this is what the next generation need to see in order to carry out the most basic of tasks...we are fucked 😠

[Kaos]

If you don't know how to properly store your tools so you don't hurt yourself then you really shouldn't be using tools anyway

[matteedstrom]

#1 Not a good job!
#2 Masking tape? Remove the plate? 2 screws!
#3 Kinda ok^^
#4 Use the claw on a carpenters hammer (most ppl have one at home)
#5 Anything can be ha fastening point for a mirror!
#6 is kinda clever, but i use paper tubes from stores. The ones they have plastic bags for fruit on, i just take them home.
#7 Is kinda clever. And i like it!
#8 Known for ages among anyone who sel gaps!!!
#9 Better to clean the edges and turn the can upside down after use^^
#10 WHO DOES NOT DO THIS???
#11 I actually learned something^^
#12 Old tip!
#13 Stupid!!
#14 Old tip!
#15 AGAIN! Use tha claw on a carpenters hammer!!!
#16 Tip for beginners.
#17 Usefull, but not smart if the bolt is stuck!
#18 Plain stupid and don't work! Use the right bits for the screw!!
#19 Stupid again! Easu in means easy out! Use a Philips screwdriver or the bit to start the hole!
#20 EVERYONE knows this!
#21 Use the right bit for the screw and go full speed and this will happen by itself!!!
#22 AGAIN!!! Use the rigt bit/driver for the screw!!! (she is not)
#23 Works if you don't have an adjusteble wrench or a tool that fits over the already made piece^^
#24 Usefull
#25Who need to drill 100 papers???? I WANT TO KNOW!!!
#26 Not a good idea! Learn to twist the cable to make a untwisted loop instead!!!
#27 Useful as fuck, but can be bought aswell.
#28 Why not use a bigger carbiner and skip the tie?
#29 If you own a Rotaing toll and a gluegun ... you must have a standard vacuum aswell^^ It works!
#30 Why? Use ANY other tool shown to cut the tape ;)

WAIT A BIT!!! I THOGHT THIS WAS 29 TOOL HACKS!!!!
Ok then

#31 But why? Costs $1 in any store!
#32 Only works with water based paints. And they are actually cheep tools so just by a new one^^
#33 *SIGH
#34 Known to any man who owns a grinder^^
#35 Learn how to keep your tools INSIDE the box! (and a saw comes with a guard, save it^^)
#36 No pockets in womens workwear^^ I see where this is going^^
#37 Vinegear is better!
#38 Smarter with a paper or a small plastic tube. Saves more space!
#39 Buy a fucking toolbox for $15 FFS!
#40 See #39!
#41 Works.
#41Learn how to halftwist a cable for every turn and the problem in gone!!!
#42 Turn the hammer sideways if you need focus on other things!
#43 Only stupid ppl don't think about that! You can also use a plain paper and stick the nail trough!!

Why is the video called "29 Tool's Hacks Few Men Knows About" AND have 43 tips^^
If you need this video... You are not a man!!!

[ljburkelb]

I hate to see anyone fall from a ladder, but the view was worth it 😂

[adenmoua]

1. when your wall is broken put some silicone and not wall mud
2.when painting a door put vaseline and not take it off
3. make a hole in you hammer and not use pliers like you show later on
4.put toothpaste on your painting and then your wall and not clean it and don't get a picture hangers and a coke can
5.drill a hole in you wall and hold a vacuum instead of cleaning it after your don't drilling all your hole
6.get a magnet and put it in your pocket and have the nails fall of and not just hold them in your hand
7.why the hell did you have to drill a in you hammer if your showing that same thing done with pliers
8.most "MEN" know to put a piece of wood on the other side the the wood to not get blow out
9.if people war working on something they will not get a coin and they will get the right size wrench
10. you don't need a magnet because most screwdriver are magnetic or you just stab it in and hold it while you screw it in
11.put soap on you screw because that will not help and use a center punch to star the hole and not just have the screw on the drill and hold it while stabbing it in
12.up tape to know have far to drill when you putting in a drywall anchor, this is only useful if you trying to have the right depth on something that is not hollow
13.use head of the screw to make an indent, some screw are just flat so just get a countersink bit or just a get a big drill bit
14.get a nut and put it on a screwdriver, all you need is a smaller wrench
15. buy a screw bin
16.disassemblea fly smacker to make a drill bit, just buy some
17.make a make a cable holder because "MEN" don't know how to wrap cable apparently, better yet just buy one
18.make a hammer holder because "MEN" aren't going to have a tool pouch
19.don't make that dump thing for drilling because you already going to use a vacuum to clean up after
20. make a small scissors and knife because "MEN" need some dump small tools
21. be dump and have you saw stick out and not have the blade in the bin
22.just hold the screw, it's not that hard I do it al the dam time and look you using the drill just fine
23.don't use coke and lemon use rust remover
24.put can in between buckets and use all the buckets and just have can laying around
25.make hole in a bucket and not buy a tool box
26.waise a leather glove and not just buy a tool box
27.use a carabiner and and not have a tool belt
28.make a cable hold, you leave it on the floor your still going to trip
29 you don't need a sponge you just need to watch were your hitting, and who the hell even has a sponge in there hair
30.using pliers to hold the nail while hammering is slower then just holding it and hitting to slowly till it stuck and then hit it hard and at 0:48 the dummy is using hammer that is more harder to nail with due to it's weight and some how she can't do it with a normal hammer, maybe because shes a girl and not a "MEN"

why do they make this video if it says this in the description "This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability. Any action you take upon the information on this video is strictly at your own risk, and we will not be liable for any damages or losses. It is the viewer's responsibility to use judgment, care and precautions if one plans to replicate." why the hell do you put this in the description and not in the video, maybe it's because if people knew it was a lie wouldn't watch it or it's because your greedy or just both

[renaissanceman]

3:50 you have a claw on your hammer, you don't need pliers to bend the nail. You could also pull the nail.
4:50 there'sno need to plunge the screw into the bar of soap, just run the threads across an edge.5:00 youdon't need a depth Guage when drilling for an anchor in sheet rock that's thinner than your anchor is long.
5:50 your screwdriver already has a place for using a wrench, it's underneath the nut you needlessly used.
8:26 you're joking, right? All that work for a tiny pair of scissors that won't cut anything because they aren't heat treated which will never happen because they're made from a paper clip instead of quality steel.

[davidpeters]

I love the part where the lady puts a magnet inside her pocket so that nails can fall off the outside of her pocket whenever she moves around instead of putting the nails into her pocket.

[thesaviour]

13:13 was definitely the only bit that wasn't terrible

[Phil-Sands]

Best part of the video was looking down at her chest when she fell off the ladder :-)

[guasson]

"my life changed after i make a mini scissors" said no man EVER

[christinaalls]

Where is the part of video that explains the hole in the wrench shown in the thumbnail (henceforth referred to as "the reason i clicked this video")
?

[markvan]

I love the home made box cutter idea. Once you've bought the materials it only costs a bit more than one from a hardware store and only takes all afternoon to do! Plus the blade can even cut paper!

[charlesnichols]

Be sure to spray WD40 in the glove fingers to prevent rust

[fisherfilmworks]

Man I was thinking about declaring bankruptcy over the price of box cutters but once I watched this and realized I can make my own for 4x the cost AND spend all day making it, I once again have hope in my life, even if the homemade version sucks ass. THANKS!!

[joebaldino]

i enjoyed the video, loved the overalls

[jaka]

13:13 is it just me or did everyone rewind it 10x times ;)

[maxmechanics]

I'm drilling holes into all my tools now! Thanks!