Axle Wrap and clunk 2017 Chevy silverado

This is Before my rough country Traction Bars you can hear the clunking, the traction bars get rid of the clunking by 80%, you can still hear it from park to drive but from shifting down from 3rd to 2nd or 2nd to 1st it got much more quiet, You really have to listen for it to hear it. Will have a video soon with the traction bars.

[Chevywhoopwhoop]

Makes sense to get traction bars when you put a one piece driveshaft.
Then your rear diff wouldnt be moving up and down causing your yolk or driveshaft to go out early 🤙🏽

[nauticalknot]

I got the same thing! I can feel it in my cab too. It started recently.

[DjStalin]

2017 Suburban. When I’m at a stop and then accelerate there is a clunk in the rear end area. Does it every time. I’m pulling the shaft, checking the joints, and lubricating the splines. Might as well do all that than guess and only lube the splines as recommended by dealer.

[sockpuppets]

i think the axle is moving free of the u bolts..id try and get some friction in between there maybe aftermarket u-bolts tightened to shit

[michaelmiller]

I have a 16, tried to do a burnout the other day and it felt like my whole rear end was jumping up and down, clunking like crazy. And it wasnt tire hop at all. Anybody have any clue? Pisses me off cause i know thats not right even if i was doing burnout.

[mattsalassalas]

I have a 2016 6.0 Silverado it clunks and shit when downshifting at slow speeds. ???

[michaelmiller]

Tried a burnout the other day in my 16, wasnt tire hop it felt like the axle was slamming up and down, hard clunks. Pissed me off cause i know its not right at all

[Mr.Beastforpresident]

Is it stock? Sounds like you have a turbo @ 0:55

[joshmarauder]

I have a 2004 2500 non hd silverado.. can i order 2500 hd traction bars and install em on my frame or is the hd frame wider?

[BEASTMODE]

Ever made a video with the traction bars installed?

[lindawilliams]

It not the rear end making the noise it's the front end and when I backup it make the noise and when I turn... Sound like something is loose 2004 Chervlet Suburban

[craigr]

Starts around 10, 000 miles I got it too

[caseynail]

iv broke two drive shafts in half and how not sure just did a full rebuild frount to back

[MrOlea]

that lays pretty good rubber - 6.2????

[JDWard-Jeepster]

Those are some seriously wimpy springs.

[dewaynemiguel]

No wonder it clunks the way you abuse the sob

[usernameusername]

Ok so the wheel is attached to the axle and not soposed to come of in my hand I guess I pulled a batmobile

[rive]

same just started with mine 2017 4x4 4.3 single cab dealer is no help so far apparently normal escalating to gm canada now see what happens

[noelquiambao]

Have 2017 Silverado with a 4” lift. Put a BDS traction bar on it. Rides lot better from when I had it. Any traction bar would solve that problem.

[gapple]

I have a 17 as well. Mine has a vibration when i hammer the gas, but not on a slow acceleration, only heavy. Dealer blames my 6" lift, but it just started doing this, Ive had the lift for a year. Does yours vibrate on a hard launch ?