How to Use Neverwet on Boots

To use Neverwet on Boots:
- Clean up your boots and put wine bottles inside of each boot to avoid the spray from getting inside the boots
- Shake the Rust-Oleum Neverwet can for about a minute before you start spraying (make sure that you hear the rattle inside the can)
- Make sure that you are on a well ventilated area, do a test spray on a cardboard
- Use Step 1, Base Coat first and spray only a fine coating evenly
- Let your boots sit for a minute and apply another coat (2-3 coats are recommended)
- Now apply Step 2, Top Coat on your boots, shake the can before application
- Beware: Don't apply Rust-Oleum Neverwet to anything that you really care about keeping the same texture because it affects the leather and material
- Do the same procedure as the first coat and you can apply multiple coating too
- Let you boots dry (recommended up to 12 hours) and test it with water to see if it's really water proof and it really is water proof!

Added resource on how to use Neverwet on Boots: