How to Replace Front Brakes 04-05 Nissan Titan

Buy Now!

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, Nissan Titan or Armada.

🔧 List of tools used:
• A Piece of Pipe (for leverage)
• Brake Parts Cleaner
• Large C-Clamp

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[AAuto]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[MikeSmith-chjv]

So I have watched this a few times, I need a brake job on my 05 titan. Thank you for showing me the way. Don't forget the wheel chock, for those of us on the ground.

[awesomexistence]

Very good and informative video. I would add; Open the brake fluid reservoir cap and check the fluid level as you progress to each wheel. You’ll likely need to remove some to keep it from overspiling if doing all 4 brakes.

[j.e.]

Providing verbal and written list of tools, especially socket sizes and torque values, set this videos apart!

[ikthoosrh]

Thank you so very much for a fantastic video.  On my 2007, the bolts holding on the caliper frame were 18mm instead of 21mm.  Other than that, exactly as on the video.

[alyssaacosta]

Do you NOT need to bleed the brake line when done?

[chetos]

Thank you for you video. Will but your product.

[Alex_Edits]

Do you guys have a diy for Nissan titans on a power steering fluid flush or fill

[jasonwhitecotton]

Whe. I installed my new rotor and pads my rotor seemed flush but was t as the studs from new wheel hub assembly were different lengths coming out from the rotor when tightened

[davidderfus]

I have the Bosh calipers, not the Akebono's. These are the 320 rotors aren't they ? ? ?

[jacobbean]

Is the procedure very similar to a Nissan titan 2010?

[jackster]

I have one that I can’t get it back on help me please

[Redheadkat]

17mm caliper bolts on 2012 Titan, not 14mm

[AlexRivera-prcl]

bought rotors and pads and after a few days their just constantly squealing brand new brakes really any suggestions

[Jehovaesmipastor-se]

100 ft-pnd
why some people said 155 ft-pnd