Wish i knew this before spending $$$/Leaking Fuel Injection cleaning/HOW TO clean GDI injections

Wish i knew this before spending $$$
in this video i will show Leaking Fuel Injection cleaning, most people will tell you to replace it
back in 2014, i had 2009 GMC Acadia and the dealer told me to replace the leaking fuel injectors and cost me close to $1000
but in todays video i will show you HOW TO clean GDI injections if its not sparing well or leaking fuel, and when you have that problem, you will ask ur self why is gas coming out of my exhaust
the injectors not sealing gas and it leaks into the cylinder and comes out from the exhaust

🔔 Hit the bell next to Subscribe so you don't miss a video!

Follow my Instagrams so we can be best friends
-------------------------------------------

Like my facebook page:
-------------------------------------------

**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos

Gears I Use:

For contact
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

[sleeve]

Man.... Dealership's are gonna hate you for this one !
Great tip !
👍😉

[MTcx]

I highly recommend also changing the seals/o-rings every time you take a direct injector out.

[wbby]

Two quick ultrasonic cleaning tips:
>Put the injector inside a small plastic bag and fill the bag with the cleaning fluid. Then fill the ultrasonic cleaner full of water and it the bag in the water, means you don't have to fill the ultrasonic cleaner full of cleaning liquid.

>Never put metal directly on the bottom of the ultrasonic cleaner, it can damage both parts, a think sheet of plastic or paper is enough. Look at the more expensive ultrasonic cleaners and you'll see they have cages to stop objects sitting on the bottom.

[davidlustrup]

a single puff of smoke from the tail pipe thats only there upon first startup is also a leaking nozzle/fuel injector because when you shut it off at night it drips all through the night into the cylinder untill the fuel rail pressure subsides, and makes a pool of gas on the piston top that turns into that puff of smoke when you start it up the next day

[Bloodman]

Thank you my brother for posting this video because we asked you about how to clean gdi injectors
It shows how a great person you are and how you care about helping people
Really appreciate you brother

[likamero]

Even if we don't do it, it's still so good to watch with satisfaction and learn from your videos👍

[InsideOfMyOwnMind]

Years ago I attached a long hose to an injector, filled it with seafoam, pressurized it and applied intermittent power to the injector. Worked great. If you don't have an ultrasonic cleaner it might be worth a try.

[DjDestinyChicago]

I’m watching this thinking the tools used in the video cost as much as a new injector. Man was I wrong! I might order these. Thanks for the upload 👍

[coatercup]

First time I've seen ultra sonic cleaning for fuel injectors. Looking great!

[GoingOrbit]

A cheap way to clean injectors out is to soak the nozzles in a small cup of injector cleaner. Let them soak for an hour or more if they are nasty. If they are dirty it usually turns the fluid in the cup orange. Once done spray off the nozzle with some parts cleaner spray.

[Hiim]

This is such a great idea, a game changer actually! Why haven’t I added an ultrasonic cleaner to my tool kit? Great job sir, thanks!

[calicojackrackham]

Perfectly safe as well. I was an Electronics Engineering Tech. We used ultrasonic liquid cleaning for military grade electronic components during the manufacturing process. This cleaning process was required by our contracts with the Aviation companies that were our customers.

[fatalballistics]

Nice video works like a charm we as consumers should do more things like this to lessen waste

[danfreiday]

I use the sonic machine all the time, on any small parts, it cleans like magic, I do alot of motorcycle repair and especially carburetors, my tank is small so so I pull.the float bowls and sometimes have flip the carb and half at a time, I got at harbor freight, about 100$, mine heats up and I use water and dawn dish soap, I also do 3 or 4 cycles, yes i use water and dawn dish soap, about a couple good squirts per tank, its gets dirty fast, but work fantastic, a great to have for every mechanic, and and very nice video, short, sweet, and informative

[grantdubiel]

This is why at the dealer I work at, we recommend a fuel injection cleaning every 30k miles, and its $130. We do 2 separate services depending on if ir vehicle is direct injected or port injected

[chuckecheese]

Brilliant! Used the Ultrasonic bath for cleaning small parts years ago, it does work! Thanks for the video Ali.

[hoost]

Great job. Never thought about using an ultrasonic cleaner. Seafoam, yes. I just run a couple of cans in half a tank of fuel from time to time for that concentrated effect. I use my car for fleet work. ( 6 hours plus a day )

[bryanrocker]

I have 2 ultrasonic cleaners and I use them on a wide variety of things. They are great for removing rust if you use vinegar. That is good to know.

[otm]

You cannot set metal directly on the bottom of the ultrasonic cleaner, that reflects the energy back into the transducer and you will destroy it. You need to use something to act as a spacer a little plastic tray works great.

[waqarqadeer]

Nice. It's satisfying to see after spraying pattern.