I built a rover using a Raspberry Pi & Arduino

You would also need to get RPi cam running and copy paste the direct camera stream url into the front end code on the rover control web page. Good luck to those trying the build!

Parts List:
Assorted metric nuts & bolts

Video Gear:
Edited in Adobe Premiere Pro CC

#robotics #rover #3dprinting #diy #maker #creative #minimalist #minimalism #electronics #projects #electronicsproject #raspberrypi #arduino #pizero #arduinomega #bambulabsx1carbon #bambulabs #sony

00:00 Introduction
00:47 Research & Requirements
01:35 Electronics Plan
02:48 Starting the Build
03:33 First Circuit Test
04:00 Web UI
04:15 Finishing Wheel Assemblies
05:20 Testing Motors
06:25 “Wired & Tired”
07:25 First Drive
08:12 “It works, it runs, it turns”
09:25 “We Thought this Shot would be Cooler”
09:45 Goodbye USB Cable
10:15 Layers of Electronics
10:45 I ruined a Pi Camera
11:40 Heading to the Park
13:47 Offroading
14:04 “My Little Robot Friend”
15:01 “Into Unknown Abyss”
15:30 Demo of Movements
15:52 Outro
16:15 “Let’s keep the Vibe Alive”

[raynerlimfy]

As an engineering student, watching this was a joy!

[wildwillyrobots]

@LukasDeem I know it takes a lot of dedication to finish a project like this, so as the creator of the original design, I'm really happy someone takes on the challenge. In the end that's why I shared the design.

[BlueConsignment]

The music was so spot on haha. Man! The effort you put in this video is incredible! Great job Lukas!

[fynnjones]

Man the video quality is insane and the buildquality as well... i am impressed and then i saw only 4k subs... man i found a hidden gem here

[XxHeManWomenHaterxX]

Great Job! thanks for being transparent about the mechanical design coming from WildWilly

[wachtmanknifeandtool]

MAN, the algorithm has been bringing some good stuff recently. Really love how many creators are starting to use their own original music. Absolute banger video!

[idahobob]

Great Project!

A few tricks on the DC-DC converters...
For the servos, look into a BEC for an RC plane. Much smaller than the the DC-DC you used.
For the Brushed DC motors, the voltage isn't the problem, it's the current. If you set the max current limit to below the max the motors can take, they can "Run at any voltage" (as the H-Bridge will protect them.)
Also, you can just run the bridges off full voltage, but limit the max PWM to 50%, for half voltage. (The current limit would be another level of protection.)

Last, look into Conformal Coating for all your PCB boards to make them water proof-ish. Dialetric grease in all the connectors (LOTS OF IT) is your friend.

[mr.rajikon]

Do upu have a video or guide on how you prgrammed the pi and arduino?

[wnccitprogram]

I am a computer science instructor at a small community college. We have started building this rover using your bill of materials. We are at the planning and purchasing stage. The students are excited about building this. Thanks for the BOM and code.

[Razvan_CP]

I cannot express, how much I love this video. As a CS student and future Space Engineer this video encouraged me to don't stop when it feels like is terribly hard/difficult. I know everything is possible, and your project demonstrates me this once more. Well Done!!! 👏

[JohnKlopp]

Very cool, your wife seemed very excited for the progress too! Subscribed! 👍

[MarykatherineKotch-mctp]

The music had me rolling 😂hahaha! What an awesome project!!

[Defianthuman]

I think the custom song is great. The only other person who does anything like this is RCtestflight. He has a friend who makes the songs for his channel. This video is great.

[odedinafeyitunmise]

this was honestly amazing to watch! it felt like it was just 5 minutes long... i know i will be binge watching your channel tonight!

[SmoothCoaxing]

the production value in this video was insane, keep up the great work

[bathscars]

coolest project with a raspberry pi that i ever seen

[ulaB]

Lukas complains about bad wifi and latency.
Nasa: Please... we had 20 minutes of communication time delay to the mars rover.

[LaithausHablemoslo]

Adding the SUNO music was genious... The lirycs are cracking me up 🤣🤣🤣🤣

[Caratao.Lorence]

I am not an engineer, but an IT student, I am also inspired by robotic inventions and trying to understand the basics and build my knowledge and experience through time.

[hardikarya]

Can u explain me why u used rpi and Arduino mega as a controller and a slave respectively? I didn't understand.