STATICALLY INDETERMINATE Structures in 10 Minutes! - Axial Loading

Do NOT use the Superposition Method... instead do THIS! Statically Indeterminate Problems.

0:00 Statically Indeterminate Definition
0:57 Superposition Method
4:18 Do NOT Use Superposition
5:05 Thermal Expansion and Temperature
6:16 Statically Indeterminate Torsion
7:15 Lecture Example

Superposition Method and Statically Indeterminate Problems

____________________________________________________________
Next Lecture:
Stress CONCENTRATION Factors and Factor of Safety in 11 Minutes!

Previous Lecture:
Axial Deformation, Thermal Expansion, and Poisson's Ratio in 12 Minutes!

______________________________________________________________
Other Mechanics of Materials Lectures:
Watch the entire course in less than 4 HOURS!!

20 Elastoplastic Beams and Residual Stresses (torsion too): coming soon

[LessBoringLectures]

CORRECTION: at 4:12, the value for Rc = -8.57 kN, and later, the value for Ra = -11.43 kN.

[brysonladd]

man thank you. These lessons are top notch. There are a lot of good videos out there from other youtubers but few with this level of quality. you deserve way more subscribers

[SkylordAh]

Why is it Rc = 11.43 at 4:12, shouldnt it be 8.57?

[herbertattema]

Wow, those first 4 sentences answered every question I had, thank you so much.

[Dafwog]

Wow, this makes it so much easier to understand. Thank you!!!

[Ans_aka_Inzi]

Excellent lectures Man... Keep up the good work!

[tommyminahan]

dude seriously thank you great explanations and drawings. I'm curious what do you use to take these notes? like what software and hardware? Thanks again for the great video

[mmmmas]

lecture is very good...but brother...your calculation is wrong ....Ra=-11.42

[z_]

The value for Ra and Rc are wrong.. for Ra it’s 11.43 and for Rc it’s -8.57

[friendlyfox]

Hey can u explain why Reaction force Rc direction was taken along positive x. It should be negative x right?

[Xuan_tei]

3:23, where did that 0.01 at the area came from? anyoneee pleasee answer.. thank youu

[benkrauss]

3:09 why is there no internal force between B and C?

[tauhidkhondker]

Values he calculates for Ra and Rc should be switched, I was so confused the whole time!!!

[tonyehart]

please i need simple material for Torsion

[NicoleDiaz-ksqg]

If RA = 11.43, shouldn't RC = -31.43?

[kaniabas]

my instructor requested to watch this video 4:21

[shadracvilla]

It doesnt work on single component bro

[princebryan]

I didn't understand nothing man 😂 textbook is better