I wish I knew this BEFORE I bought my AC INFINITY T-SERIES fans...

In this very first 3-Minute-Thursday I'll be going over the reason I'm unhappy with my purchase of AC Infinity's T4 and T6 fans and what you should be aware of before you purchase the T-series lineup yourself.

The Equipment I Use to Grow:

Mars Hydro SP3000

Mars Hydro FC3000

Mars Hydro TS1000

Mars Hydro Complete Setup:

Inkbird Temperature AND Humidity Controller!

Inkbird ITC-308 Temperature Controller

AC Infinity CLOUDLINE S6 Inline Fan

AC Infinity CLOUDLINE T6 Exhaust Fan

VIVOSUN 400GPH Submersible Pump

Small Floor Fan:

Bigger Floor Fan:

Mt Favourite Grow Bags/Pots:

AC Infinity Flexible 6-Inch Aluminum Ducting

Bluetooth Humidity Meter with APP Alerts and Data Storage

TAGS: Mars Hydro ts-1000, led grow light, review, unboxing, first impressions, elevated agriculture, led grow light, how to grow weed indoors ,how to grow weed, how to grow cannabis, cannabis, growing weed, marijuana, weed, how to grow marijuana ,indoor grow, how to grow weed indoors guide, seed to harvest, growing cannabis, led grow lights, grow guide, grow marijuana, cannabis grow, mr. canucks grow, autoflower, growing marijuana, growing weed indoors, organic gardening, medical marijuana, how to grow, grow cannabis, weed grow, grow weed, gaia green, growing indoors, how to grow weed plant, how to grow a weed plant, grow weed easy, how to plant weed, indoor grow tips, how to grow marijuana indoors, grow room, weed plant, mars hydro, from seed to stoned, mr canucks grow, how to start growing cannabis.

[dannysgrow]

good to know i was thinking if getting 2 of those and Im an HPS grower. thanx for the heads up.

[CNMedia.Service]

I had this issue with my LED. My problem was caused because I ran the probe wire with all of my other wires for everything through the same hole in my tent! So I ran the fan and probe lines through the other side and have had no issues since!

[thefstopshere]

i had a similar issue when i started with the T6 when using an LED light but the cause was not the light but rather that i had the temp sensor cable and the power cable routed next to each other. as soon as i separated them, the readings straightened themselves out. Had the fan for 2 years now and love it.

[TheOriginalNotorious]

I can't believe I stumbled onto your video by mistake!!! I literally just went through this with one fan. I thought I was getting true readings. Thank you.

[andrewgonda]

Hey brother, im using a digital ballast that can do both HPS and MH. To my understanding its the digital ballasts commonly used with HPS that is emitting some type of radio interference that throws the probe out of whack. I havent used the HPS light yet, but i was having similar symptoms with the MH. Apparantly also these digital ballasts can also mess up HAM radio operators signal. I made a cheap homemade faraday cage out of aluminim tape and a old shelf and shielded my ballast into a corner, and then i removed the probe from being cabled with the lights power cable to the ballast, and made sure the probe cable is far away as possible from ballast

Edit- i also put the controller unit in a metal box with a lid

[MikeS-urql]

Cut a hole in the bottom of a solo cup & slice it in thirds. Take the bottom third with the hole

Put the probe through & it will now be mostly shaded with the cup from the hps

Might have too add a degree or two for the indirect temp reading but this should be a little solution.

If a cup is too big maybe just a 1x1 inch of cardboard above it too block the light as well

[ProCanGenetics]

I have the new 67 controller and its actually amazing, connect to bluetooth aswell and Spider Famer LED Lights would be easier to maintain and would produce less heat then an hps light, but yea great video man

[briannicholls]

I did not have any problems when I was using HPS. I ran through 2 grows with HPS and a T6. I am guessing a few more variables in play. I now have LED's and no problems. Good luck. The fans are amazing. I hope you can take full advantage of their features.

[davidlebin]

There is a work around!!! I ran into the exact same issue. Tried a ton of things and finally realized it is the sensor probe. Specifically, being an unshielded cable. Wrap the cable from the 1/8th inch input to the end of the probe. This will effectively shield the cable from the magnets in the ballast. Mine works all the time now.

[---GOD---]

Another issue: during low temps, the T-series fan will turn off instead of running at a low speed. AC Infinity has fixed the issue but it might not hit shelves for a while.
The S-series doesn't have this issue so if you cannot wait, buy the S-series fan and then add the Controller 67 separately.

[B.White]

Love mine. And with the silence Mr my two run silently until about on 6 or 7 before I hear it working it's magic.

[mitchfishes]

So glad I found ur channel. I was about to buy one 👍

[ahoyskid]

I just sheltered my probe from direct HPS light. Moved to LED recently anyway so not a problem anymore. Cool how we both ran into the same problem 🤣

[Follows_Jesus]

Im beyond happy with my controller after learning how to actually use it. Its confusing at first but works great.

[ahoyskid]

Controller 67 is a must have with the T series EC fans. Just still a little salty I had to buy it separately…..

[ZteveW]

Where do you put the temperature probe if you're not using it for plants? I just need it to push more air into a room that stays warm in my house.

[robertthrem]

Put the thermostat in the shadows under the plant. you can't check the temp in the direct sunlight either. .. try it., but it won't tell you the temp at the top of the plant. So keep it cooler settings.

[javierreynapadilla]

I am using T4 and is the best fan I had used. There is no noise. My tent doesn't hear like a plane. The sensor and control are great.

[B.White]

Because the hps are dinosaurs in the light game. All good things will come to its end eventually....
As soon as you said that it work fine outside of the tent. I asked what lights is he running? And ya answered it right then...lol.

Have you checked out Niwa Grow Hubs? A must for your 3 minute piece in my opinion.

[ReapingTheHarvest]

Weird, the probe for mine is accurate with HPS. The digital controller was a waste for me though since I run the fan at a constant speed 24/7.