DJI Phantom 3 payload test part2

Now we measure the power consumption(W) to estimate flight time (in minutes) against the payload ( in grams).

[owpeterj]

Ja, nice. Having the schema at the end gives time to peruse the data. Valuable research .
Ja - goed gemaakt inzover dat de resultaten uiteindelijk te bekijken zijn - en te overvoeren. Bedankt

[alikarimloo]

at last a test with flight time, thank you.

[panagiotispapadakis]

Hi,
When the drone was flying did you notice any vibrations?

[claudiolatino]

but the weight it raises is without its battery as it was powered externally by a cable.

[nochillarickroller]

Exactly what I needed for a project of mine. Thank you!

[DemocraticKing]

I HAVE A QUESTION PLEASE,

For your current measurement, can you briefly walk me through how you hooked up your shunt resistor and multimeter with the Phantom battery to get your measurement??? thank you!!

[anamawjoud]

I can't find and download the test results on your website?

[Ksepso]

hello, what do u think the recommended payload should be ?

[neatrate]

I noticed you removed the camera. So it does work without it?

[paulolobo]

Hi,

I been making some tests with dji p3 pro, i disconnect the gimbal and camera from the plugs, and test a flight i saw the same timeofflight with gimbal and camera connected, i was thinking that camera and gimbal spend a lot of battery i was wrong.
So i ask this, what happens if you remove the battery from the drone, this will remove 370gr from the drone, and connect the battery by cable to the drone, 4 cables... can you test this ??

[gtdrone]

Thanks so mucho, this information is really useful

[onjo]

bad experiment you can see how windy it is by the bushes out back.. that affects the phantom because it tries to maintain position before putting on full thrust and you can tell by the video it's on GPS mode not free mode

[viniciusfreitas]

thanks. Obrigado tinha algumas duvidas sobre isso!  Brasil