HOW TO EASILY REMOVE RUST IN LESS THAN 1 HOUR: Square Body Chevy Hotrod Build

KILLING RUST Square Body Chevy C10 Budget Hotrod Build.
10% OFF THE BEST INDOOR/OUTDOOR SPEAKERS ON THE MARKET

THIS CHANNEL IS FOR FUN!!

send stuff to:
po box 2088
Muldrow OK 74948

[rmckayne]

Nice, for some applications. Ospho, and many others, like concrete etching, are phosphoric acid. Is relatively cheap and remove rust, neutralize it . When washed and dry leave a coat ready to receive any primer. Work for me since the 70’. Thanks.

[wingrider]

Some people say if you see red, it proves the vinegar does not remove or neutralize the rust. No. The vinegar DOES neutralize rust. You may have an area that requires some sanding to get to the rust that is embedded, but once there, if vinegar is used, it will not only remove, but neutralize the rust. It is a chemical reality. No hocus pocus. Now, are there other chemicals that work faster? Yes, but you are dealing with more and more toxicity and disposal problems with those - and expense. And vinegar will leave a rust free and sterile surface ready to prime and paint - a little 180 light sanding and cleaning prep may be needed but that's all. Vinegar must be washed off with clean water to neutralize its effect on metal after it is used - and dried after rinsing with water. I just stripped a Ford 9 inch rear end and used vinegar to deal with any rust. The metal is now clean, sterile, and oddly enough, does not flash rust afterwards. Just nice and satiny looking metal, ready to prime and paint. Another thing that affects how your bare metal is prepped is whether it was sandblasted to bare metal or soda blasted. Vinegar work - 4 parts water to 1 part vinegar. Just plain, old, white vinegar. My friend Pete says this is the way it's done - and I believe him :)

[garybuffington]

The EASY WAY to keep it WET with Vinegar is to first spray it down. Then apply "connected" paper towels over the area. Then spray the paper towels wet again. Then cover the wet area and wet paper towels with PLASTIC or plastic wrap. Then let it work it's magic. Boom!

[RALSOLDIR]

I like the fact that keeping the part wet with vinegar means there would be a lot less rust dust flying in the air

[hickeyskustomresto]

Used this method a few times, it's worked for me and seemsnto hold up fine.
Did a trucks in 2018, still look perfect today.

[Rottingboards]

Looks like I could wet sand with 50/50 vinegar water and have less wire wheel spray mess? And finish up with Eastwood phosphate spray then primer.

[mindovermatter]

I am going to use this process for painting the floors and underbody pf my 89 ford bronco

[AustinwiththeAspen]

If I wanted to get slightly deeper where it’s all bare metal (shiny metal) would that help or hurt my project

[OverTheHillTraining]

What ya really mean is, safety 3rd.😊😂

[robertdoane]

Yes, a mask is very important.Hate to see you in the hospital with breathing problems.