How to install led headlight bulbs - H4/9003/HB2 - Novsight Auto Lighting

========================================
Novsight Auto Lighting is a company working on the design and selling of the best automotive LED lighting, LED Headlight Conversion Kit, fog Lamp, led work lights, light bar, and so on. Nighteye Auto Lighting company only supplies high-quality LED lights. You can get it from eBay and Amazon.

This video will tell you in detail how to install led headlight bulbs （with cooling fan） - H4/9003

- Novsight US Amazon Shop（Comment below for 20% Promotion Now）:

- Click here to discover more LED HEADLIGHTS:

[michaelmcarthur]

After all this time of swearing and cursing that I have struggled putting these into my car's, I come across this video I didn't even realise that the locking ring came off. Made the Job a hell of a lot easier. Thank you and great video and explanation

[CoolitzX]

Finally was able to find the correct position. The bulbs were upside down... Thank you

[muzammilnawazhashmii]

So finally after the search of 2 hours, i find this helpful content to install Led in my car correctly as i have installed last week and LED is upside down i was disturbed by the light not satisfying my needs, and now i came to know that i have installed wrong.. i will make it correct tomorrow ✌️✌️✌️

[gelan]

Thank you for this clear and helpful video, you showed me to know what LED LAMP MODEL BUY AND INSTAL. I bought today “Novsight N61 General Series | H4 9003 LED Bulbs”. For Honda Fit 2012.

[creativeminds-pluc]

Hi, i have an h4 led bulb but it has only one filament which has total of 6 small csp leds 3 for upper and 3 for lower beam.. traditional h4 bulb has 2 filament. Is there any problem with this because my beam pattern is not projected like halogen one's

[aaronbell]

Best bulbs have them in my car and vans been in the car 4 years 👌

[Ldmullah]

I installed mine completely wrong thank you for this 😂😂

[statyisgod]

How will i know if the bulbs are outside down? What do i need to make sure of?

[Saa]

I have installed LED bulbs for sienna 2016 but high beam is downward the bulb has 9 3 clock orientation what should do to put light straight for high beam

[richardchan]

How to remove locking ring of H4 Novsight A500.

[tonychg]

Haloo... instead of 3 to 9, 0 clock....can i put to 12 to 6 o clock..?
Mine is h4 ..night eyes..

[azzermallillin]

Hello! Is there anyway i can adjust sa body of the bulb? Because they dont perfectly align horizontally like u said in the video. My bulbs are a little tilted to the right

[saedtarawneh]

Does the n52 fits for hyundai elantra 2007 ?

[junj]

hi what can you recommend for toyota hilux revo 2017? id like to order but dont know which one.

[DeadPixelCreatives]

Is it safe to place back the rubber gasket for H4 socket? I have installed a Novsight H4 LED replacement with integrated Fan for my car. The car has a waterproof headlight and the bulb, including the fan is fully enclosed inside the headlight assembly. I feel that the LED would suffocate and overheat if i install the gasket. However, I'm not also comfortable in leaving the assembly bare at the back. Please advise.

[findolen]

I followed the steps but why my fo3 turns 12 and 6 o'clock? Any remedy to this?

[briizcustoms]

What’s the purpose of a removable locking ring?

[mominmajeed]

What to do if locking ring drops inside

[s]

Okay, it's official I need to get the rubber housing like that, because my rubber housing covers until the 3 pin making 3 holes at the rubber housing.

[youtubesachin]

In this video u r not intall proper 3’ -9’ clock u putting little bit left ????