Lawn Tractor Electric Fuel Pump Upgrade

Universal 12V Heavy Duty Electric Fuel Pump

Keystone Motorsports

Sprocket's Garage

KIPA Fuel Pump For Kohler K241 K341 M10 M12 4739319-S 4755901-S 4755903 4755904-S 4755905-S 4755911-S A-236205-S 4755904 47-559-04S 47-559-11S 4755911S John Deere AM134269 Gravely 38789

[manny]

You can use a higher pressure pump. Just need to"t' into the line before enters the carb and return it to the tank

[busterbaker]

I've searched for hours trying to find 12 volts with the on. I finally found your video with explains it quickly and succinctly. Thanks

[benst]

I've got one hooked up to a 12hp Briggs and a toggle switch. If the engine starts to flood, I flip the switch and let the bowl empty a bit.

[dimitrimotor]

or you have to work with a return fuel line that drains a little higher, then you can put whatever in it and that will really work

[theredneck]

I did this but I used a Diesel pump and it worked like a charm it was to much pressure it would back fire wen u play with the Throdle

[donens]

Confused. In your video you state that pump should be below 4 psi, yet the amazon link goes to a pump 3-6psi and a 2amp. Please explain. Won't this blow fuel by the needle valve?

[trebsr]

Thanks for the link i just ordered one and thanks for the video

[dgriffin]

My Troy Bilt riding mower has gravity fed fuel to carb. Once my fuel level drops below half a tank (tank is in front of firewall), it acts like it's got fuel starvation. Is it reasonable to add a low pressure pump?

[greenmachine]

Ive got a 19.5 hp i/c opposed twin briggs and stratton engine with a 4 screw nikki carb craftsman lt1000 manual is it possible to switch from the fuel pump on the carb to an electric fuel pump this is a carb that has no Solenoid the carb mounts on the intake

[metalrooves]

My tanks all suck out of the top!How will l get gravity feed ?

[andmk]

Hi! Since I want to upgrade a diesel hatz on bolens 1225 with an electric pump, what I should do with the pulse pipe?

[rudygeorgiamulesandcountry]

I'm wrestling with this situation right now !

[Novagunner]

Why would i go electric? more reliable?

[bobbailey]

Used 2.5 to 5 psi pump tried two both ran for 1 minute (clicking) when engine started clicking stopped and pump dead. Its a kholer magnum 18hp carburettor no line back. Any ideas whyvthe pumps are dying?

[steveniesen]

I tried this with a 4 psi pump and am getting too much flow can I put a t and a valve

[kellymiller]

they ruin themselves because they run off the lifters which round out the fitting that makes them stop working