BYD Seal electric 🔋 SOH, hidden battery parameters | Car Scanner ELM OBD2

Показать описание

BYD Seal RWD 82 kWh 2024 - I made short drive in city and on highway 100 km/h

Video shows parameters visible in Car Scanner ELM OBD2 app

00:00 Intro
00:05 app screens
00:17 idling
00:30 city driving
02:30 max power
03:06 idling
04:07 max torque
04:30 city driving
08:54 more screens
10:32 highway

I added BYD Seal photo as background in the app (see below how to get it).

"Front motor" sensors show values of the rear motor in Seal RWD. This connection profile is probably optimised for BYD Atto3 (FWD), and "front motor" means the "main propulsion motor".

in BYD Seal the Main Motor shows negative values while driving forward (-2350 rpm), so you should choose Motor speed v.2 to get positive rpm for main motor. Or create a relational custom sensor with *(-1) multiplier in settings / sensors / add new / insert sensor.

SOH Calculated
"SOH Calculated %" appeared recently in CarScanner and value is internally calculated in the app from two sensors: [BASU] HV Battery Pack Current Nominal Capacity / [BASU] HV Battery Pack Factory Capacity

BYD SEAL RWD 84 kWh
Nominal 84.0 kWh, useable 82.5 kWh
architecture 800 V
cathode material LFP
BYD Blade
172 cells, configuration 172s1p
Nominal Voltage 550 V
RWD: Permanent magnet synchronous motor
Max Power 230 kW (313 PS)
Max Torque 360 Nm

(AWD Seal has AC asynchronous motor in the front and Permanent magnet synchronous motor in the rear)

BYD Sealion 7 AWD 91.3 kWh 🔋 First YT video with SOH, battery temperature

BYD Blade Battery in KGM Torres EVX 🔋 SOH, battery parameters (much more than in Seal!)

BYD Seal on highway in winter (Electric Seal YT channel):

📱Car Scanner ELM OBD2 app (full version Car Scanner PRO) for iPhone iOS and Android
connection profile: BYD Atto 2 / Atto 3 / Yuan Plus EV / Dolphin / Seal / Sealion (with pre-loaded dashboard pages)
vLinker MC adapter (for Android), vLinker MC+ (for iOS or ABRP)
or cheaper iCar Vgate PRO 2S (Android, iOS, and ABRP)

During app installation you should select correct Connection profile. If you already installed the app with different connection profile, after changing Connection profile the pre-loaded Dashboard pages will not follow automatically. How to get pre-loaded Dashboard: Settings / Dashboard / Reset Dashboard to default (it will erase your existing dashboard, save it first). Or use menu → My Cars + add new car

Settings - Interface Units: turn HP to kW
activate GPS speed and GPS location (GPS Altitude as sensor, GPS location on Google map in Data Recording)

Dashboard - custom photo:
you can add custom photo as background in Settings / Dashboard - Choose background image (but say NO when asked to turn all fields to transparent /that turns ALL pages to transparent/, you can do it manually on some fields: double tap the sensor field: Background and border: select Solid, Background color → mesh grid = transparent).

background photos (BYD Seal as in video):

recently added EV connection profiles in Car Scanner:
XPeng P5/P7/G6, Tata Nexon EV, Leapmotor C11, GM Ultium EV platform (Blazer EV, Lyriq, Silverado EV, Hummer EV, Acura ZDX etc), SsangYong KGM Torres EVX, Skoda Elroq, Peugeot E-3008/E-5008, BYD Seal, Seal U, Sealion 7 EV, Voyah Free, NETA V/Aya, Porsche Macan EV, Audi Q6 e-tron, Aiways U5, Skywell ET5, etc.

Car Scanner ELM OBD2 📱 Android Auto / CarPlay - open in 1 click (Car Scanner PRO)

how to install and use Car Scanner with BYD Seal (Electric Seal YT channel):

my EV videos - playlist:

my EV videos:

#BYD
#Seal
#Sealion