Andersen Drive on Levelers

preview_player
Показать описание
If you struggle getting your RV level, these just may be the trick! Worth every penny.
Рекомендации по теме
Комментарии
Автор

We have been using these levelers on our 5th wheel for 4 years. I added a little item to mine. In the large curved part I drilled a parachute cord size hole in the center of the largest recess. I put a 2 ft length of cord through the hole with a knot on each end. This allows the cord to be pulled out on either side. Then I drilled a similar hole in both sides of the chock part. The cord is used when we are removing the levelers. The person pulling out the chock can pull the cord and not need to get your fingers close to the tire. then when I reverse the cords on the leveler part are pulled out as well. I haven't tried this yet, but, it might be possible to place a stake and tie the chocks to the stake with a bungee cord so that pressure is removed, the chock will pull out and then reverse and a cord could pull out the leveler part. This would be useful on a dual axle trailer by a single person.

DougE