Removing the BMW Motorcycle Navigation Cradle

preview_player
Показать описание
#bmw #bmwmotorrad #gps #bca
Are you tired of staring at your empty navigation cradle on your BMW motorcycle. In this video I will show you how to remove it.
Рекомендации по теме
Комментарии
Автор

This video is great. Thank you so much. I did this job in less than 10 mins!! Couple of tips:

If you put the windscreen in approximately the half way up/down position you can just thread the cable out of the fairing without needing to unscrew anything.

2. If you rotate the cradle on the bar about 90 degrees it’s much easier to take out the 4 screws and catch them in your hand.

Great video! Thank you!

MichaelClarke
Автор

I think the 'Dummy' is a splitter, for a USB socket. Just a wild guess. Also I think you was able to use the "dummy' connector's cover to cover the loos cable connector instead of the tape.

Notoxic
Автор

Thank you, this is the first video I've seen that shows how to remove the dust cover. I've had the bike 6 months and didn't know how to remove it.

MaverickAus
Автор

Great video. I need to remove my cradle and thought it was going to be more complicated. Good to see that it’s pretty easy before I start installing my Chigee Apple car play unit. Thanks

mikeharman
Автор

Thanks for this video. Your approach worked like a charm on my F750GS.

paulberger
Автор

Thank you very much.

I was worried about the double plug, but thanks to your video I'm not afraid anymore.

Vs.

Maicro.
Автор

Appreciate that. Going to replace my BMW Nav 5 with Galaxy tablet.

toddhaskins
Автор

Just bought my 2023 GSA last week. I’m going to remove the NAV cradle over the weekend. The BMW aftermarket cradle that costs $260 does not fit my iPhone 14 Max. The 3 cameras on the iPhone stick out too far to fully seat within the cradle, so off it comes. Ordered the Wunderlich cross mount with the NAV adapter. I will attach my Zumo to that. My cell is attached to the bar via the Quad Lock mount.

spkuse
Автор

Very cool video .... I'm putting my quad lock in it place as it has map's and other stuff

chrislecouteur
Автор

Thanks for the help, just wish I'd watched before I removed all my side panels off 😂

nicholasbassett-treetopmin
Автор

Thanks for the video!

Do you know what that white connection is called? I want to connect something else to it.

jinzhongyang
Автор

Dankeschön für das Video <3, das mit der Mutter ist mir auch passiert... xD

pandajordi
Автор

Thanks for the video! It helped a lot! But I have a question and I need your help, please: after removing the "cradle" cable connected to the motorcycle, Did you have any message on your TFT dashboard or not? I mean, an error message or something like that! Did you have any problems after removing it?

rgodinhojr
Автор

I have sold my RT and want to move my Navigator 6 to my new bike, a 2023 Yamaha Super Tenere 1200. If you're not using your Nav cradle and want to offload it, I'd be happy to buy it off of you. :)

fleuger
Автор

Hello. I want to mount this cradle on my c400x. But I have a question. Does the key cylinder only works with the motorcycle key or does it fit any key? Also what does it lock?

jorgeserrato
Автор

I have the 2022 850GS, where this connector is stuck to the frame or frame shroud. I gave it a nudge or two, but it's not releasing the connector and since it is so tight over there. I am unable to see the push to release clip. Any ideas? Other than to remove the front fairing?

aashmanhome
Автор

sweet - thanks - time to remount my phone holder

Tazelee
Автор

Why remove the cradle. If is great for mounting a nav or phone or CarPlay device.

Without screwing around with wiring

dgomes
Автор

Is that type o plug available so I can connect other GPS on the factory wiring just like that?

snypher
Автор

Is there anything else that can be connected in that thing? Who the heck uses a single use gps screen? It’s not 1999

ixsmaelable