How To Sharpen A Drill Bit Easily | HSS Drill Bit Sharpening

In this video, I show you how to make a drill bit sharpening jig. This jig is used to sharpen a drill bit very quick and easy. I hope you like this video.

►Subscribe to my channel and don't forget to click the bell 🔔

Visit My Official Website:

Social Media:

Thanks For Watching...
Hit the Like & Subscribe Button...

#mistrymaketool #diyprojects #sharpendrillbit

[appsstore]

I've been a machinist twenty years, I know how to grind a drill by hand on a grinding wheel, it's a art in itself especially big drills, not many people know how to do it.

[Trutko.Dmitry]

Только не нужно забывать периодически сверло охлаждать, тогда будет вообще ХОРОШО.
Привет из Гомеля, Беларусь 🇧🇾

[marcstubbs]

Never have I seen a more complicated way 😢

[kinglangren]

How to take off a finger. Do not ever hold a piece of metal with your fingers while drilling. Use a vice grip or any other tool. Ask me how I know.

[markharris]

You have a talent my friend please continue to show simple ways to achieve mundane tasks. 👍🏻👍🏻

[Alotipsalo]

Wow! The idea is so great, congratulations

[Craneopsss]

I give it a bit more angle and definitely a back relief. Some ofy best drill bits. Kinda gives it a step up

[InstantPayback]

Thank you for sharing these useful tips. I applied them and saw immediate results!

[colinwood]

😂😂 30 seconds on a grinding wheel does it, you don't have to build bloody Noahs Ark.

[danielmiller]

Might of never been told this but... you're one sharp guy.

[brooksrose]

You left, "easily, " behind after the fourth step.

[dannykirk]

So I need wood, bench saw, metal, angle grinder or buy a new drill ???

[walcottdion]

I just use an ANGLE grider, Put the drill bit an a clamp angle myself and sharpen, my bit works really great after and that's it

[crazycarlneb]

I do the samething at work. But I don't need a block of wood and all that jazz. I just hold it up to a grinder. Use 2 nuts for a guide. Give it back relief....voila! Done!

[bobmackenzie-tqij]

Safety was not present in any part of that demo it was notvdone properly and Noone should follow his lead.

[MrAerion]

As boiler maker I can ensure you this is stupid I only need a bench grinder and if on site a grinder

[keyesfamily]

Most of this was painful to watch. Not that hard to freehand once you learn the geometry of a drill. I find it very relaxing to sit down with good light preferably sun light and a pair of magnifiers on and sharpen 50 in one sitting. If im getting technical I'll use a gauge.

[jameswilkinson]

The chips instead of a drill a spiral piece demonstrates a drill bit sharpened off center. Not east, not good results

[tobykirkby]

Agreed with first comment, however injeneral good idear.
One point however don't ever put metal any were near a sanding disk it will catch the wood dust alight on the bottom side, perfect tinder 😮

[visionmach]

Yes sir!! Nice in a pinch but needs to be split point especially in steel.