MHP30 Hot Plate Solder Assembly

preview_player
Показать описание
  1. Segasonicfan Designs
  2. segasonicfan designs
  3. segasonicfan
Рекомендации по теме
The Best way 0:11:29

The Best way to Solder? Hot Plate to the rescue! (DIY or Buy)

MHP30 Hot Plate 0:04:18

MHP30 Hot Plate Solder Assembly

Hot plate SMD 0:00:39

Hot plate SMD Soldering #microsoldering #prototyping #MHP30 #engeniering #diyelectronics #robotics

Newbie - Reflow 0:02:32

Newbie - Reflow Soldering with MINIWARE MHP30 Mini Hot Plate Preheater

Reflow SMD Components 0:00:59

Reflow SMD Components With Hot Plate

MiniWare MHP30 Hot 0:09:55

MiniWare MHP30 Hot Plate Review ll Reflow, Rework, Solder or De-solder SMD or THT components

MHP30 Mini Hot 0:01:53

MHP30 Mini Hot Plate Preheater

946C Hot Plate 0:06:04

946C Hot Plate SMD PCD Soldering

MHP30 Mini Hot 0:00:16

MHP30 Mini Hot Plate Preheater Constant Temperature heating Table 300degree Intelligent Heating Tool

How the Hotplate 0:00:19

How the Hotplate Solder Reflow Electronic Project Soldering

Миниатюрный преднагреватель MHP30 0:00:17

Миниатюрный преднагреватель MHP30 для мелких работ например для снятия конектора на шлейфе...

MINI HOT PLATE 0:00:14

MINI HOT PLATE MHP30

Hot plate soldering 0:01:52

Hot plate soldering

Soldering with a 0:06:09

Soldering with a hot plate

HOW to ICD 0:03:13

HOW to ICD broken connector / #replace using /Mini Hot Plate preheater MHP30 SMD / ICD work @GMC

Khui hộp đế 0:00:17

Khui hộp đế nhiệt mini MHP30 #shorst

MHP30 - heat 0:01:35

MHP30 - heat plate soldering

DIY REFLOW HOTPLATE 0:00:19

DIY REFLOW HOTPLATE #SMD #HOTPLATE #PCB #arduino

Soldering SMD Components 0:00:22

Soldering SMD Components using methods for HOT PLATE || #soldering #SMD #KashyapELECTELEC #viral

Soldering SMD's with 0:00:58

Soldering SMD's with a DIY hot plate

How to solve 0:00:16

How to solve the restart problems of MHP30 heater?🧐All it takes is a little trick!👆

#MiniWare MHP30 Mini 0:07:14

#MiniWare MHP30 Mini Hot Plate from #DFROBOT Re-flowing small PCB by #Hayri Part 2

Easy installation of 0:00:17

Easy installation of SMD components. #smd #soldering #hotair

mini hotplate reflow 0:00:16

mini hotplate reflow

Комментарии
Автор

Very cool to see, it works even better if you design you PCV for reflowing/manufacturing. That mostly means that the thermal mass for each pad is about the same. So a resistor for example, do have a really big trace on one side and the a tin trace on the others side. The one with the tiny trace will heat op sooner en starts reflowing before the other one and that can create tombstones a parts that go sideways. Just a little tip.👍 Keep going! 😀

DustinWatts