Build A NAS For $35 Using A Raspberry Pi #techtok #pizero #nas #3dprinting

Build a Raspberry Pi based NAS using all new parts for only $35. This is obviously not going to be fast or have a significant amount of storage, but it'll be great for a first-time NAS build to learn how they work and how to set them up.

ADDITIONAL INFORMATION
---------------------------------------------------

PURCHASE LINKS
---------------------------------------------------

Tool & Equipment Used:

Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.

If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.

[ElectricityTaster]

Storage? Check. Attached to the Network? Check.

It's a NAS with NAS-ty speeds.

[kittenzrulz]

I love it when my NAS has under 100 mb/s w/r speeds :3

[KRich]

I remember when the RPI was about $35.00 now 😮😮😮😮😮😮😮😮😮😮😮😮😮😮

[matthewbernard]

Kind of a waste of a pi…. If you’re just going to use a usb memory then you don’t need the pi … at all. This is just printing a case big enough to fit 5 pi 5’s and putting a zero inside instead 😂

[paulogodinho]

Very cool project for experimenting, but the speed is atrocious :'D

[mnz]

Wonder full to we can prep nas in one 1 w 🤟. Would love to see in a pi4 too.

[SSFighter]

This is the worst Pi to use for this. I tried running one for a short time just to transfer some data and it was just so insanely slow…

[FeetUnder__]

Wtf is that tts german translation in the music? 😂